Skip navigation

Dayton

Local Reviews
for Dayton, MN

Comfort Matters Rated 4.9 out of 5 stars based on 22 customer reviews

Our Reviews by City

Mound, MN (48)
Osseo, MN (251)
Otsego, MN (163)
Rogers, MN (407)


Map of Dayton, MN

Quick response, Complete service




Review of Comfort Matters


Map of Dayton, MN

Great




Review of Comfort Matters

Daniel was prompt, very courteous and well mannered. He explained what he was doing and why and what we could do to help our situation. We will be in touch with Comfort Matters to discuss any future work. TYVM


Map of Dayton, MN

Great Service!




Review of Comfort Matters

Jake was courteous, helpful and did a great job of explaining things to me.


Map of Dayton, MN

Timely Help




Review of Comfort Matters

Quick diagnosis and plan for helping our situation. Thank you.


Map of Dayton, MN

Great service!




Review of Comfort Matters

Anthony is very professional and helpful at his craft. Willing to go above and beyond as needed. Really appreciate his experience and expertise.


Map of Dayton, MN

Great service




Review of Comfort Matters

Daniel took the time to answer all questions I had in a professional and friendly manner. He thoroughly explained things along the way. Thanks!


Map of Dayton, MN

Great service




Review of Comfort Matters

On time very efficient and polite


Map of Dayton, MN

Great service




Review of Comfort Matters

Cody was courteous, thorough and clearly explained the issues and repairs


Map of Dayton, MN

Great service




Review of Comfort Matters


Map of Dayton, MN

Great service




Review of Comfort Matters

Love that he called to let me know when he would be here. Also showing up on time/early. Walked me through what he found was wrong. Fixed it right away didn't have to wait for.him to.order a part. Sold me on the preferred customer plan. Really glad I called this company


Nice work




Review of Comfort Matters


Very helpful, friendly!




Review of Comfort Matters

Wes performed the necessary repair quickly and offered numerous valuable suggestions. He patiently answered my many questions. First-rate service!


Great job Wesley




Review of Comfort Matters

Friendly, quick and explained things well.


Great service!




Review of Comfort Matters

Wes was great. He explained everything as he went and he had it fixed and running in no time!


Great service!!




Review of Comfort Matters


Prompt, friendly, thorough service!




Review of Comfort Matters

Nate was prompt, thorough and patient with all of our questions. He got our furnace up and running (on a cold night, no less) even quicker than we had hoped. Outstanding service!


Love this company & its people!




Review of Comfort Matters


Great Service!!




Review of Comfort Matters


excellent service...




Review of Comfort Matters


I thought he did an excellent job




Review of Comfort Matters


Corey H.

Corey H.

Removed, recycled old water heater. Installed new 50 gallon water heater. Ran new venting, water valve, water lines, gas line, dirt leg, relief piping, fixed water leak above heater, and checked for leaks. Set temperature to approximately 120. Instructed on use and how to light pilot. Installed powered anode rod.

Near Evergreen Ln N, Dayton, MN 55327
Corey H.

Corey H.

Talked about tankless and power vent water heater installations. Gave options. Decided to install “better” 50 gallon tall natural vent natural gas water heater with powered anode rod. Gas line, water valve, and venting will all be brought to code. Job is scheduled for installation with arrival time between 10-1pm tomorrow.

Near Evergreen Ln N, Dayton, MN 55327
Cody L.

Cody L.

Arrived and condenser unit would fire but blower motor would not. Found cooling wire speed tap from motor had corroded apart and melted the wire. Repaired wire and reconnected to proper speed tap on board. Motor fired up and ac was opersting. Perfomed AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Did not find any further issues with system today.

Near 139th Ave N, Dayton, MN 55327
Corey H.

Corey H.

Woodford 17 frost free faucet in garage previously leaked from the backflow device that is built into the faucet. Faucet is recessed into the drywall. Lowering the hose reel can help prevent water leaking from the backflow device. Faucet is currently working fine. Gave options on installation of a reverse osmosis for under the kitchen sink, and a city softener that removes hardness and chemicals for the mechanical closet. Home is 5 years old. Inspection sheet was declined.

Near Cloquet St, Dayton, MN 55327
Anthony G.

Anthony G.

Ac was not operating upon arrival. After further diagnostics I found that the ac motor booster has failed. I replaced the motor booster with a brand new one and then the ac started up right away. I then performed further diagnostics and tested the entire system out. As of now everything is up and working properly. I do recommend cleaning the outdoor unit off due to some dust and other debris being built up on the fins.

Near Norwood Ln N, Dayton, MN 55327
Bradley W.

Bradley W.

Replace existing air conditioner. Move Air conditioner to south side of the home. Comfort Matters will file all necessary permits, warranties, and rebates.

Near Evergreen Ln N, Dayton, MN 55327
Daniel L.

Daniel L.

Performed seasonal precision tune up on cooling units. Chemically cleaned condenser coils, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Found issues with the older unit, first the motor booster was out of range, this could fail and cause the unit not to run. Also found no locking caps on both units. This makes the units not up to state code. Also found the pipe insulation starting to deteriorate, this will cause cooling efficiency loss. Lastly both motor starters were damaged by age and usage. These could also fail causing the unit to run consecutively or not run at all. All recommendations have been declined at this maintenance.

Near Jonquil Ln N, Dayton, MN 55327
Cody L.

Cody L.

Customer explained ac would not kick on. No call for cool getting to outdoor unit, which does not allow high voltage to pass through to system. Found sec wires flipped in furnace. Rewired and tested operation. Perfomed annual AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation.

Near Robinson St, Dayton, MN 55327
Jake W.

Jake W.

AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation.

Near 140th Ave N, Dayton, MN 55327
Daniel L.

Daniel L.

AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Found multiple discrepancies with the unit. First found the unit not up to code without locking caps. Would highly suggest to have these installed to help against theft and also act as a better seal. Also due to this home being new construction and all the new construction around the area found the blower wheel to be dirty. This can impact air speed and air performance and could hurt the system if not cleaned properly. Lastly talked about a start assist kit and a ac surge protector and how it can help prolong the life of this unit. All recommendations have been declined at this time.

Near Cheshire Wy, Dayton, MN 55327
Anthony G.

Anthony G.

Ac was off upon arrival. After further diagnostics I found that the system is low on refrigerant and therefore not cooling the house down properly. I also found multiple electrical components to be testing out of the manufacture range. Overall with the age of the system and the high cost of repairs needed I highly recommend looking into replacing the entire system. Customer said they will think about their options further and then let us know what direction they would like to proceed down.

Near Jonquil Ln N, Dayton, MN 55327
Anthony G.

Anthony G.

Customer noted that water was leaking around the exhaust and fresh air intake off the tankless water heater. He also said this only happens when it is raining hard outside, and viably noticed it coming from the insulation so not the piping itself. I found on the roof the connection was not properly sealed. I then applied silicone all around the exhaust venting to ensure there would be no gap or water to come inside the house. If any further water is found call us back right away and we can readdress this issue. Customer also noted that the infloor heat has not worked since the system was put in. I found that the low voltage wiring was not properly connected. I confirmed this with the manufacture. I then made all the proper connections and then tested the infloor heat, system was working the way it should and then the water pump failed. In order for the infloor heat to work again we will need to replace the pump and then test operation from there.

Near Norwood Ln N, Dayton, MN 55327
Anthony G.

Anthony G.

AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation.

Near Granstrom Cir, Dayton, MN 55327
Anthony G.

Anthony G.

Ac was off upon arrival. I the. Turned the ac on and proceeded with my diagnostics. I then found that the acs motor booster was testing out of range, and then also that the system was low on refrigerant. This is due to a leak being somewhere within the refrigeration system. Overall with the age of the system and the high cost of repairs needed I highly recommend looking into replacing the entire system. Home advisor visit scheduled for 5-12-2022 at 5pm with Jacob W.

Near Balsam Ln N, Dayton, MN 55327
Conner W.

Conner W.

Install 96% 2-Stage Furnace with MultiSpeed ECM and 16 SEER A/C

Near Pineview Trail, Dayton, MN 55327
Anthony G.

Anthony G.

Commercial Preventative Maintenance on rooftop units. Replace media filters on all covered pieces of equipment. Perform precision tune up on all cooling systems. Condenser coil cleaned with coil cleaner. Check all electrical inside of the unit for proper operation including motor boosters and starters. Test cfm and airflow for proper air movement. Test supply and return temperatures to ensure proper cooling. Systems are all cooling and operating at this time with no issues. Removed and replaced blower motor booster due to old one testing out of the manufacture range. Once replaced I tested operation and found that everything is up and working properly as of now.

Near Dayton St, Dayton, MN 55327
Anthony G.

Anthony G.

Commercial Preventative Maintenance on rooftop units. Replace media filters on all covered pieces of equipment. Perform precision tune up on all cooling systems. Condenser coil cleaned with coil cleaner. Check all electrical inside of the unit for proper operation including motor boosters and starters. Test cfm and airflow for proper air movement. Test supply and return temperatures to ensure proper cooling. Systems are all cooling and operating at this time with no issues.

Near S Diamond Lake Rd, Dayton, MN 55327
Jake W.

Jake W.

Inducer motor is seized got it to start running for the time being.

Near Pineview Trail, Dayton, MN 55327
Daniel L.

Daniel L.

When arrived found furnace to be functioning properly. Checked over operation of the furnace and found the gas pressure to be higher then normal, adjusted gas pressure and also found the high temp safety switch to be to sensitive to heat from tripping on and off multiple times. Replaced high temp safety and retested operation of the unit. Found the vent motor to be pulling above its rated power and its also extremely loud. This motor will fail sometime in the future. With age and condition of this unit I would encourage replacement soon. No further attention is required at this time.

Near Vinewood Ln N, Dayton, MN 55327
Daniel L.

Daniel L.

When arrived unit was off, went to thermostat and found it in heat mode and the screen was blank. Tested down at the equipment and furnace worked when jumping the proper wires. Them reconnected the wiring and tested at the thermostat. Furnace functioned how it should. Deemed it a failed thermostat. Installed a new T4 thermostat and retested operation of unit. Found multiple issues during the testing process. One the vent motor had a high pitched sound coming from it, that’s due to bearing failure. Also found the blower motor booster out of range this will put damage on the blower motor. Also found the blower wheel to be dirty, this will impact airflow if not cleaned. Lastly with the size of the equipment and size of duct work, there isn’t enough airflow and causing high restriction in airflow. This will shorten the life of the unit tremendously. With the age and cost of repairs in near future would consider replacement at this time. All other recommendations declined at this time.

Near Vinewood Ln N, Dayton, MN 55327
Cody L.

Cody L.

Returned to replace RTU filters.

Near Dayton St, Dayton, MN 55327
Taylor L.

Taylor L.

CUSTOMER CALLED BECAUSE MIDDLE AREA WAS GETTING REALLY WARM. 4 ZONES ON THE ROOF TOP. 1 THAT CONTROLS 3 OFFICES, 1 THAT CONTROLS 1 OFFICE, 1 CONTROLLING MAIN AREA, AND ANOTHER CONTROLLING CONFERENCE ROOM. BY THE SOUNDS OF IT THE ONLY THERMOSTAT THAT IS REALLY USED IS THE ONE CONTROLLING THE 3 OFFICES. THE ISSUE WITH THAT IS WITH THAT BIG OF A ROOFTOP THERE WAS A BYPASS DAMPER THAT WAS INSTALLED TO RELIEVE STATIC PRESSURE IF ONLY ONE ZONE CALLING. WITH THAT ZONE CALLING THE BYPASS BLOWS INTO THE CIELING ABOVE THE MAIN AREA CAUSE IT TO GET WARM. EXPLAINED TO CUSTOMER WHAT I FOUND AND WE WILL COME UP WITH A SOLUTION TO ROUTE THAT BYPASS AIR SOMEWHERE ELSE. MARTY ALSO MENTIONED THEY WERE HAVING ISSUES WITH THE THERMOSTAT IN THE FRONT MEETING HALL. ALERT SAID NO POWER FROM HVAC EQUIPMENT. PRO8000 STAT. HAD 24v COMING INTO MY STAT BUT WHEN YOU PUT IT ON THE WALL IT WOULD JUAT FLICKER THE HONEYWELL SCREEN AND NOTHING ELSE. INSTALLED T4 AND CHECKED OPERATION. UNIT RUNNING AS IT SHOULD.

Near S Diamond Lake Rd, Dayton, MN 55327
Nathan Y.

Nathan Y.

Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Water heater gas stop valve needed to be replaced due to leaking issues. Gas stop was replaced and checked for gas leaks. No leaks were found and water heater was operational. Also recommended and quoted a new water heater. Will follow up with customer on Thursday next week. Recommended bird screens and a surge protector. Will follow up with those recommendations on Thursday.

Near 131st Ave N, Dayton, MN 55327
Johnny A.

Johnny A.

Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Flame safety sensor tested out of manufacturers range. Replaced component under warranty. Tested component. Component is now operating in manufacture range.

Near Hemlock Ln N, Dayton, MN 55327
Nick M.

Nick M.

Blower housing was vibrating and shaking a bunch at arrival. After inspecting and removing the housing, I found that the Iwave that was installed was screwed into on of the brackets holding the hosting down. I moved this and fully tightened the bracket. The noise and shaking got a lot better I believe the I wave being screwed onto the. Bracket wasn't fully allowing the bracket to hold the housing all the way down as it should

Near S Diamond Lake Rd, Dayton, MN 55327

Do We Serve Your Neighborhood?