Skip navigation

Fridley

Local Reviews
for Fridley, MN

Comfort Matters Rated 4.9 out of 5 stars based on 14 customer reviews

Our Reviews by City

Mound, MN (48)
Osseo, MN (251)
Otsego, MN (163)
Rogers, MN (407)


Map of Fridley, MN

Great service!




Review of Comfort Matters

Johnny was very polite, professional, thorough with the job and was informative with details and advice for maintenance.


Map of Fridley, MN

Great service by John !!!




Review of Comfort Matters

John is very good at explaining everything that was going on with our furnace


Map of Fridley, MN

As usual, wonderful service. Technicians and Office personal alike.




Review of Comfort Matters


Map of Fridley, MN

Absolutely GREAT service




Review of Comfort Matters

From beginning to end, my experience with Comfort Matters has been exceptional.


Map of Fridley, MN

Very happy!




Review of Comfort Matters

I was so pleased with my service call today. Nate was prompt, very quick in fixing my furnace and really helpful overall. Thank you!!


Map of Fridley, MN

I'd use them again.




Review of Comfort Matters

Jeff was courteous and punctual. He identified the problem with my humidifier, and checked the furnace to make sure it was working properly. It was painless, and a very reasonably priced service.


Map of Fridley, MN

Great service




Review of Comfort Matters

Really nice guy. Well spoken. Explained everything in a clear manner


Map of Fridley, MN

As always Great working with the Comfort Matters team.




Review of Comfort Matters


Map of Fridley, MN

great job cleaning the air conditioner




Review of Comfort Matters

a very nice person, but whats with the new hole in my vent?


Map of Fridley, MN

We like Wes




Review of Comfort Matters

We appreciate the way the woman worked to get Wes to us on the day we called, even though he was booked all day.


Rick johnson




Review of Comfort Matters

Great service. Everything was explained very well.


100% Awesome




Review of Comfort Matters

Wesley is or go-to guy.


Great service.




Review of Comfort Matters


Great service. Wes did his job Tuning and cleaning very professionally.




Review of Comfort Matters

The only issue had to do with an add on feature namely the surge supressor. I had $75 dollars worth of coupons but my neighbor had no coupons. I asked for a 2 for deal as he was here cleaning both of our equipement. I was told by him that he could not do that. I guess I expected at least a phone call to see what could have been done. Bottom line was we ether both did it or neither of us did it. I think maybe CM lost a little money at my house today. It was very nice that I received a phone call that they were going to arrive outside the window.


Nathan Y.

Nathan Y.

AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Humidifier precision tune up and cleaning. Remove current water pad, clean off pad housing and water distributor. Clean out humidifier box. Clear out drain line. Replace with new water pad. Test operation. Recommended a blower wheel cleaning due to dirty blower and a start assist kit for the ac unit.

Near S Fillmore Cir NE, Fridley, MN 55432
Taylor L.

Taylor L.

Replace furnace and air conditioner with 96% AFUE 1-Stage Multi-Speed Furnace and 13 SEER A/C. Terms: 50% down, balance due at completion of installation OR Approved Financing

Near 6th St NE, Fridley, MN 55432
Derek B.

Derek B.

Customer informed me there was an error code on thermostat reading ERROR 53. Error code 53 is displayed when the thermostat detects an issue with the outdoor temperature sensor. Outdoor temperature sensor was fine and was not an issue. Attempted to reset thermostat to get rid of code. Thermostat continued to display error code.Informed customer that thermostat will need to be replaced under warranty. Returned later in the afternoon to install new upgraded thermostat. After installing new thermostat, tested operation of features and heat mode. Will have to return for AC tune up another day. Was unable to attach hose to the spigot near AC unit. AC unit was making loud rattling noise. I added a screw on access panel and tightened. AC unit sounds much better.

Near S Fillmore Cir NE, Fridley, MN 55432
Jake W.

Jake W.

Gave options for replacement. Will follow up later today.

Near Clover Pl NE, Fridley, MN 55432
John R.

John R.

System not working correctly upon arrival. System leaking water everywhere. Evaporator coil partially frozen. System is low on refrigerant and has a leak in the system. Due to age and condition and cost of repair, replacement is the best option. Collected $5815 as half down for new system. Install scheduled for Friday, arrival time 9:30-10am.

Near 6th St NE, Fridley, MN 55432
John R.

John R.

System not working correctly upon arrival. Fan would not run, compressor would run though. Outdoor coil plugged and motor booster failed. Swapped failed motor booster with new, performed a cleaning and tune up after repair. System is now working correctly. It will take a lot of time for home to cool down. 90F in home. AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Refrigerant charge is ok at this time.

Near Fairmont St NE, Fridley, MN 55432
John R.

John R.

Air Conditioner off upon arrival. Turned it on to test operation. Compressor would not run. Diagnosed a failed motor booster. Installed a new power, reapplied power to unit and tested operation of new part. Unit is now up and cooling correctly.

Near Stinson Blvd, Fridley, MN 55432
Jake W.

Jake W.

Found the cap to be bad. Replaced and tested. Refrigerant levels were a little low but decide to start with this today.

Near Riverview Terrace NE, Fridley, MN 55432
Corey H.

Corey H.

Installed dual flush valve mechanism in American Standard toilet that was a special order. Dye tested toilet.

Near W Danube Rd, Fridley, MN 55432
Corey H.

Corey H.

Performed diagnostic leak test. Rebuilt upstairs Moen tub faucet that was dripping. Flushed noisy water heater that was installed in 2012. Found leaking master bathroom toilet leaking. We will order parts and return on June 1st between 8am and noon to repair the master bathroom toilet.

Near W Danube Rd, Fridley, MN 55432
Jake W.

Jake W.

Replaced recalled drain pan. Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.

Near Brookview Dr NE, Fridley, MN 55432
John R.

John R.

Furnace in lockout upon arrival. Reset switch to test operation. Furnace cycled for ignition, gas was not lit though. Igniter got voltage but didn’t glow. Replaced failed igniter with new, furnace is now running and heating. Collector box has corrosion and evidence of a previous leak from where box is stamped together. Inducer motor also has a intermittent squeal noise. It may fail in future. System replacement is recommended. Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.

Near Alden Way NE, Fridley, MN 55432
Ian H.

Ian H.

Furnace precision tune up. Pulled and cleaned burners. Inspected heat exchanger for any visual defects, did not find any at this time. Tested ignition assembly components, including flame safety, for proper tolerance ranges. Cleaned out condensate trap. Checked all remaining electrical inside of the unit, measured motor amp draws for correct operating range. Inspected blower wheel for dirt and debris. Checked airflow for proper air movement. Measured combustion and gas pressure for safe levels. Ensured temperatures were within manufacture desired performance. System is heating and operating at this time.

Near Polk St NE, Fridley, MN 55432
Johnny A.

Johnny A.

Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. System is operating as it should.

Near 67th Ave NE, Fridley, MN 55432
John R.

John R.

Turned up heat to test operation. Unit tripped on flame safety. Swapped isles part with new and didn’t have additional problems. Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Filter is dirty causing higher duct pressure. System replacement may be in future due to age and condition.

Near S Fillmore Cir NE, Fridley, MN 55432
Ian H.

Ian H.

Furnace precision tune up. Pulled and cleaned burners. Inspected heat exchanger for any visual defects, did not find any at this time. Tested ignition assembly components, including flame safety, for proper tolerance ranges. Cleaned out condensate trap. Checked all remaining electrical inside of the unit, measured motor amp draws for correct operating range. Inspected blower wheel for dirt and debris. Checked airflow for proper air movement. Measured combustion and gas pressure for safe levels. Ensured temperatures were within manufacture desired performance. System is heating and operating with no issues at this time.

Near 2 1/2 St NE, Fridley, MN 55432
Jake W.

Jake W.

Performed precision furnace tuneup. Checked igniter, flame sensor, temp rises, checked burners, took all amp draw’s, and did a full combustion analysis. Replaced filter and did for humidifier tuneup.

Near S Fillmore Cir NE, Fridley, MN 55432
Daniel L.

Daniel L.

Furnace precision tune up; clean and tune up furnace, clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor airflow, checked heating temperatures, and tested overall furnace function. Due to age and condition of system, replacement is encouraged. All recommendations declined at this time.

Near 5th St NE, Fridley, MN 55432
Anthony G.

Anthony G.

Boiler precision tune up; clean and tune up boiler; check/verify water pressure, inspect and clean burners, test ignition components, test/adjust gas level, test safety circuit, check motors and pumps, checked all electrical components, checked heating temperatures, test combustion, and tested overall boiler operation. Found the system was low on water pressure, I added water so that the system was operating at the correct water pressure, and made sure that all zones and radiators were receiving hot water. I also added in F1 water treatment to help keep the water within the boiler from corroding or causing any issues within the water lines.

Near Tempo Terrace NE, Fridley, MN 55432
Brandon D.

Brandon D.

Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Heat exchanger has rust spots. Rust compromises integrity of metal. No cracks or holes in rust at this time. Annual servicing is encouraged to keep an eye on rust. Furnace is from 2003

Near Hugo St NE, Fridley, MN 55432
Brandon D.

Brandon D.

Replaced failing blower motor. Tested and verified operation of new components. Furnace is working properly. Also add return ducts to Improve airflow to lower workload on furnace blower.

Near Brookview Dr NE, Fridley, MN 55432
John R.

John R.

Customer stated how A/C was not cooling. Turned it to test operation. Diagnosed system low on refrigerant. Performed a tune up before charging it. Added sealant into system, it’s a bandaid fix, not a long term solution. Also brought A/C up to code. Balanced charge to proper subcooling. No further cooling issues on unit. AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Motor booster is leaking oil and failing. System replacement is recommended.

Near Hwy 65 NE, Fridley, MN 55432
Bradley W.

Bradley W.

Repair. Locking cap a slight rattle. Thum gummed both caps and sound is gone.

Near Brookview Dr NE, Fridley, MN 55432
Brandon D.

Brandon D.

AC was off on arrival. upon firing it up compressor would come on but fan would not. found AC motor booster to be failed. Replace component tested and verified operation of AC system once it was up and running. AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation.

Near Polk St NE, Fridley, MN 55432
Brandon D.

Brandon D.

Arrived to find outdoor fan not spinning. Motor is not seized up looked into AC motor booster found the fan side to have failed. Blower motor is also starting to fail. Appointment to go over replacement options is set up this would solve that problem.

Near Brookview Dr NE, Fridley, MN 55432

Do We Serve Your Neighborhood?