Heating and Air Conditioning in Osseo, MN
Your comfort matters to you, so it matters to us! This is our philosophy at Comfort Matters Heating and Cooling, and it’s why so many homeowners in Osseo, MN rely on us for their heating, AC, and other comfort services. We have a strong set of beliefs that drive us to do the best for every customer. You can count on our integrity, honesty, and dedication to your family’s health and comfort.
- Family-owned and operated
- 100% Money-Back Guarantee
- We do things the RIGHT way, not the easy way
Our comfort advisors and technicians are ready to help you enjoy the home comfort you deserve.
Schedule service today: we’re with you through THE HIGHS & LOWS!
Heating Services in Osseo, MN
The winters in Osseo, MN are often unforgiving … but our team is unrelenting when it comes to helping your family keep warm. We install a range of heating systems—furnaces, boilers, heat pumps—but we’ll never push you on an expensive system that doesn’t meet your needs. We’ll see that your heating remains dependable with maintenance through our Sunshine Club, and our technicians are ready to help with fast repairs when you need them (and they’ll leave your house cleaner than they found it).
Air Conditioning Services in Osseo, MN
If you’re tired of sweating through muggy and hot summers without a decent air conditioner, Comfort Matters Heating and Cooling can change that. We believe you should have cool comfort in every room, even that bedroom far in the back. Whatever AC service you require for perfect home comfort, you’ll find that we can do the job right: new air conditioning installation, air conditioning replacement, regular AC maintenance, and any size of air conditioning repair. We’ll keep your home fresh and efficient.
Indoor Air Quality Services in Osseo, MN
We believe that clean air means healthy, happy families, and our advisors and technicians know how to make your house an oasis of fresh air. We provide duct services to get your ventilation system in top shape, and we install many of the best, most advanced in air purification and air filtration systems that remove harmful particles from your household air. We even work with powerful humidifiers and dehumidifiers to keep you in perfect comfort around the year.
Commercial HVAC Services in Osseo, MN
We’re a locally-owned company and understand the challenges businesses in Osseo, MN face. We use our training and knowledge to provide great commercial heating, commercial cooling, and commercial indoor air quality to other companies. We abide by the same set of standards and beliefs for commercial services as we do for residential. When you need our help, you’ll always get a real person on the phone, and our technicians will never take shortcuts—we only do things the right way.
Water Heater Services in Osseo, MN
It’s easy to take the hot water supply in your home for granted. But a reliable water heater isn’t something that simply happens: it takes dedicated professionals like the team at Comfort Matters Heating and Cooling to ensure a water heater is properly installed, repaired, and maintained. No matter what you need for an energy-efficient supply of hot water for your family, you can put your trust in us to get the job done. Let us help improve the life of you and your family.
Local Reviews
for Osseo, MN
Powered by Nearby NowOur Reviews by City
Great service
Hulasare - Osseo, MN
Knowledgeable
Cavanaugh - Osseo, MN
He was able to figure out a work around for a problem.
Friendly service, great prices!
Nick - Osseo, MN
Our nearly new furnace that the builder put in went out at the worst possible time - on a Friday night during a stretch of bitter cold weather. I called and left a message after hours thinking I MIGHT get a call back in the morning. Much to my surprise I got a call back 10 minutes later and had an appointment for the next morning. Jordan was on time and super friendly. He did a great job explaining everything to me and he had everything tuned up and running perfectly within an hour. I thought an emergency repair was going to cost me a fortune but they came out AND made the repair for less than the trip charges of the other guys. Fantastic job all around!!
Great Customer Service
Cook - Osseo, MN
Great service
Kidd - Osseo, MN
Nick was great and in and out real quick, thanks for the great service!!
Super service
Idle - Osseo, MN
Anthony was great at sharing what he found and what options we had - communication was clear and super responsive .
Great service!
Schultz - Osseo, MN
Great Communication, Great Service
Hedtke - Osseo, MN
Comfort Matters does an excellent job communicating. They gave me service day and time options. They worked around my meeting schedule. They texted me before my tech arrived and Cody communities before, during, and after the service. Completely satisfied!
Great visit
Kidd - Osseo, MN
Cody did a great job, albeit bad news, but he was very professional and knowledgeable about what we needed/need to do. Thanks!
Great Service
RH - Osseo, MN
Great service
Koubaytari - Osseo, MN
Daniel was great and walked me through everything and provided multiple options
Great service
Sorensen - Osseo, MN
Terrific service, friendly technician
Kastendieck - Osseo, MN
John
Huser - Osseo, MN
John has been very professional and a great resource for managing my HVAC systems
G
Gooding - Osseo, MN
Great service!
Snively - Osseo, MN
Great service! Our technician provided professional service. The best part was he took his time to explain how all the parts work together. I have a much better understanding of the role of the air filter.
Great service
Bly - Osseo, MN
Ian was really great. Super helpful and did a great job of explaining things.
Awesome service
Amy - Osseo, MN
I'm impressed with the bio that is sent in advance of the technicians arrival and Cody was thorough and explained everything to me and easily answered my questions. Great company!
Great service
Erickson - Osseo, MN
Always impressed
Dardis - Osseo, MN
Ian and Comfort Matters provide the best service and keep my heating and cooling systems running smoothly
Ian H.
Upon arrival, the unit was operating correctly for about 10 minutes and would then fault in the high temperature limit switch. Static pressures and temperatures were checked and were in normal ranges. The filter was also clean. Gas pressures were taken and were far above desired ranges that the manufacturer recommends. The gas pressures were reduced and the fan airflow was increased. After these changes were made, a full furnace tune up was conducted to ensure proper operation after these changes. The unit is heating and operating correctly at this time.
Daniel L.
Found the water heater leaking from the drain valve, noticed water coming from behind the actual valve and could be coming from the tank. Told the homeowner that if you were to do the repair it could still leak due to a tank failure, also if the water can’t drain all the way you would still need to replace the tank. Will be coming out Wednesday afternoon to replace the water heater.
Bradley W.
Humidifier Installation with Automatic Control, 5 Year Parts and 2 Year Labor Warranty
Daniel L.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Found the blower wheel to to be dirty this will cause the furnace to work harder and decrease performance. Also found the motor starter out of manufacturing range, once out of range it will put damage on the blower motor due to not having its full power to start. With the age and condition of the system replacement would be encouraged, Chris A will be meeting with you on February 21st to go over system replacement. All recommendations declined at this time.
John R.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Installed new furnace filter, existing one was plugged with lint from humidifier. Whole home humidifier is recommended. While performing safety inspection, found a crack in the heat exchanger. Cell 3 is cracked, found the crack while the high limit was removed. There isn’t carbon monoxide leakage at this point, but there could be at any time based on its condition. Also found blower wheel dirty and blower starter failing. Due to age and condition, replacement is recommended. Jacob will come out later today to quote replacement.
Anthony G.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.
Jake W.
Wanted to see if an outdoor temperature sensor could be ran. Will have to run through garage wall down the garage wall and outside.
Ian H.
Furnace precision tune up. Pulled and cleaned burners. Inspected heat exchanger for any visual defects, did not find any at this time. Tested ignition assembly components, including flame safety, for proper tolerance ranges. Cleaned out condensate trap. Checked all remaining electrical inside of the unit, measured motor amp draws for correct operating range. Inspected blower wheel for dirt and debris. Checked airflow for proper air movement. Measured combustion and gas pressure for safe levels. Ensured temperatures were within manufacture desired performance. System is heating and operating at this time. Upon arrival, the filter in the unit was completely restricted. Readings were taken before and after the filter was changed for comparison. The blower wheel was found to be dirty as well. The customer was made aware that their furnace was in the beginning stages of the secondary heat exchanger failing. At this time, carbon monoxide levels are in safe ranges at 11 PPM. The pressure th
Nick M.
Replace furnace
John R.
Thermostat dead upon arrival. Nest thermostats need 5 wires for it to work properly. Only have 4 wires and a resistor. The resistor sometimes can help but not always. Due to the ongoing thermostat issues, went ahead and replaced it with a Honeywell thermostat, come with a lifetime warranty. User guide is down by furnace. Thermostat set to 65F. No furthur heating issues. System replacement is recommended.
Jordan L.
Furnace was working on arrival, customer said it had an error code for open limit switch and he had just recently changed filter. Performed furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. I found temperature rise was too high and raised the heating fan speed, static pressure was also high on the return side which causes reduced airflow and also causes furnace to overheat. System needs more return air added and would also perform better with a better filter system. Recommended changing 1in filter every month.
Conner W.
Water heater replacement
Daniel L.
Arrived to drop off space heaters placed them so they cover the whole main level of the house.
John R.
Furnace off upon arrival. Turned it on to test operation. Furnace was making loud humming noises. Blower motor was drawing 9 amps and would not spin. Blower is failed. Performed a safety inspection as well. Found the heat exchanger failed. Found cell 2 and 3 cracked at high limit switch. Unable to check if there is co leakage in home due to failed blower. System is 25 years old and not worth repairing. Jacob will come out and quote replacement today.
Ian H.
Furnace precision tune up. Pulled and cleaned burners. Inspected heat exchanger for any visual defects, did not find any at this time. Tested ignition assembly components, including flame safety, for proper tolerance ranges. Cleaned out condensate trap. Checked all remaining electrical inside of the unit, measured motor amp draws for correct operating range. Inspected blower wheel for dirt and debris. Checked airflow for proper air movement. Measured combustion and gas pressure for safe levels. Ensured temperatures were within manufacture desired performance. System is heating and operating with no issues at this time. Air exchanger precision tune up. Remove filters and core to vacuum. Also clean cabinet interior. Inspect bearings on blower assembly. Install core and filters. Clean off outside hoods. Test operation of air exchanger. Customer purchased two new SecureAire Filters that will be shipped to their home.
Daniel L.
Found water build up on ground tried to locate highest point of failure in water heater, noticed rust build up on side of tank near the burner box. Due to rust and corrosion build up this had caused the inner tank to fail. This tank is irreplaceable and was deemed unrepairable. Will need to follow up for replacement date.
Anthony G.
Furnace was not operating upon arrival. Furnace was flashing a error code that the pressure switch was failing. I ended up finding that the exhaust motor port had gunk in it and was restricting the air flow. I cleaned the exhaust motor and the pressure switch tubes and tested again and found that everything was up and working just fine as of now. I replaced the flame safety due to the old one testing outside of the manufacture range. After testing the system with the new flame safety the burners kept flickering on and off then eventually went out completely. The control board started flashing the pressure switch error code once again. I do highly recommend replacing both pressure switches due to the history of them and from the gunk that was within.
Ian H.
Furnace precision tune up. Pulled and cleaned burners. Inspected heat exchanger for any visual defects, did not find any at this time. Tested ignition assembly components, including flame safety, for proper tolerance ranges. Cleaned out condensate trap. Checked all remaining electrical inside of the unit, measured motor amp draws for correct operating range. Inspected blower wheel for dirt and debris. Checked airflow for proper air movement. Measured combustion and gas pressure for safe levels. Ensured temperatures were within manufacture desired performance. System is heating and operating with no issues at this time. Upon arrival, there was a water and moisture issue present within the furnace caused by the inducer motor clamp being installed incorrectly. The clamp was repositioned and it was confirmed there was no more water leaking after that. There was minor damage on the burners, faceplate and door switch from the moisture. All of the previous water was dried up. The humidifier
Taylor L.
Replace existing furnace and air conditioner, remove and dispose old units, file permits, file rebates, file warranty. Cost includes tax. Terms: $9503 due at completion of installation
Jake W.
Precision furnace tuneup. Checked igniter, flame sensor, burners, took all amp drawls, and a full combustion analysis.
Ian H.
Furnace precision tune up. Pulled and cleaned burners. Inspected heat exchanger for any visual defects, did not find any at this time. Tested ignition assembly components, including flame safety, for proper tolerance ranges. Cleaned out condensate trap. Checked all remaining electrical inside of the unit, measured motor amp draws for correct operating range. Inspected blower wheel for dirt and debris. Checked airflow for proper air movement. Measured combustion and gas pressure for safe levels. Ensured temperatures were within manufacture desired performance. System is heating and operating with no issues at this time.
Cody L.
Annual Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Recommend replacing humidifer panel. Current one is calcified and there is a lot of build up. This could potentially cause leaks. Blower fan is dirty with new construction dust. Informed customer this is common to see in newer houses. Vent protection for outdoor furnace venting recommended to prevent animals from getting into exhaust system. No repairs or recommendations done today.
Cody L.
Arrived and furnace was in ignition lockout per the error code given. Cycled power to furnace and it fired up with no issues. Furnace continued to operate normal multiple times on start up. Spoke with manufacture about issues and they believed the corrosion on gas valve was caused from water leaking onto gas valve for fresh air furnace intake. Replaced gas valve with universal part. Adjusted gas pressures as needed, conducted full gas line leak search. No leaks found. Furnace operating normally after repair. To prevent issue from occurring again, installed fresh air intake drain kit. Ran drain line to floor drain. All is operating normal at this time.
Nick M.
Replace existing furnace
John R.
Customer stated how humidifier was leaking. Everything dry upon arrival. Drain line was flowing water normally. Not backed up. Pad is correctly installed. Ran separate heating zones one at a time to see if the increased pressure would cause it to leak but it didn’t. Manufacture said that the air could be blowing water off the pad. Blower activation works like it should. Told customer to record it leaking next time and open up humidifier to see if all of the inside plastic parts are wet. May want to look into a new humidifier at this point.