Albertville
In the Greater Minneapolis North West Metro area, Comfort Matters Heating & Cooling, Inc. is well known for providing exceptional furnace repair, installation, and service. The people we send out to serve you are also top notch, something you'll see in their reviews below. Everyone you deal with at our company has the goal of making sure your experience with us will be so good you'll call us every time you need help. You can feel confident working with Comfort Matters Heating & Cooling, Inc. because we stand behind our work and comply with all local codes. This is why, as you can see by the map and reviews below, we are rated so highly for Furnace & Air Conditioning Repair in Albertville MN in Maple Grove MN. Call us today at (763) 515-0166!Your Best Choice for Furnace & Air Conditioning Repair in Albertville MN
Local Reviews
for Albertville, MN
Powered by Nearby NowGreat experience with a awesome service representative!!
Vereb - Albertville, MN
Awesome!! :) Service representative Cody was friendly with a positive attitude, he is always welcome in our home.
Great Service
Lazere - Albertville, MN
Ian was super personable and professional!
Great Service!
Duncombe - Albertville, MN
Ian was very professional and did a great job explaining what he was doing. Great customer service overall!
Great service
Dziuk - Albertville, MN
Great service !
Konz - Albertville, MN
Great Service!
Michelle D - Albertville, MN
We always have such great service and professionalism with Comfort Matters!
Review
Keske - Albertville, MN
Great Service
Walerius - Albertville, MN
John was on time and communicated all my options. Repair was quick and got us up and running in no time.
Great service
Ebersviller - Albertville, MN
Friendly but professional service!
Kisner - Albertville, MN
The two guys came at the time expected and introduced themselves to us. They used covers over their shoes and blankets on our carpet as to not get anything dirty. They started working right away and did an exceptional job at installing our new AC and furnace. After they were done they went through what they installed and asked if we had any questions. Very thorough and didn't leave any mess behind!
Response from Comfort Matters:
Thank you for taking the time to share about your recent experience! We truly appreciate it. Enjoy your new AC and Furnace!!
Great, friendly service!
Bullen - Albertville, MN
Response from Comfort Matters:
Thank you for your 5 star review
Great Service! Very friendly and professional.
Holmberg - Albertville, MN
Great service
Kalis - Albertville, MN
Response from Comfort Matters:
Thank you for your 5 star review
Great service
CB - Albertville, MN
John did a great job explaining what was going on, taking pictures, and troubleshooting. He even cleaned mouse poop out of my air conditioner!
Great Service from John
Beckfeld - Albertville, MN
Friendly guy. Patient. Informative.
Yang - Albertville, MN
Jordan was great. He was helpful, patient, kind, and respectful. Definitely thought he was a great person. The price was kinda high, but I think (I’m hoping) that was out of his control. I assume parts and labor made it pretty expensive.
Cody Rocks!
Atkinson - Albertville, MN
Provided great information. Expert knowledge demonstrated. Recommendations all backed up with thorough evidence and remediation suggestions.
Warm fuzziness and great service
Goetsch - Albertville, MN
Informative & Professional
Turner - Albertville, MN
Good service, on time, showed professionalism, and explained the work and potential needs. Price was a bit higher than expected for a part replacement.
Very thorough, really cared
Voigt - Albertville, MN
Anthony was great - Couldn't have had a better experience with him. Great customer service, and worked very hard to figure out what was going wrong.
Ian H.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Humidifier precision tune up and cleaning. Remove current water pad, clean off pad housing and water distributor. Clean out humidifier box. Clear out drain line. Replace with new water pad. Test operation Installed vent protection to flue exhaust pipes
Ian H.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Sold 20x25 EAC filters and humidifier pad
Cody L.
Performed Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Furnace operating normally at this time.
Cody L.
Performed Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Furnace operating normal at this time with no further concerns.
Jake W.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.
Cody L.
Returned to install vent cone for furnace venting.
Cody L.
Performed Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. At arrival, found that cone was still missing on venting from previous visit. Customer agreed to natal new cone. Will return tomorrow when I have part to install.
Ian H.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.
Ian H.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Air Exchanger and tune up. Remove filters and core to vacuum. Also clean cabinet interior. Inspect bearings on blower assembly. Clean off outside hoods. Gave home owner instruction on how to soak core and filters. Also gave instruction on how to re install core, filters, and door. Humidifier precision tune up and cleaning. Remove current water pad, clean off pad housing and water distributor. Clean out humidifier box. Clear out drain line. Replace with new water pad. Test operation
Anthony G.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.
Taylor L.
WATER DRAINING IN FURNACE. INSTALLED INTAKE DRAIN KIT UNDER WARRANTY.
Cody L.
Performed Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. During evaluation, found that blower fan is very dirty, and this will drastically reduce the effectiveness of the fan and decrease airflow in system. Cleaning is highly recommended. Motor booster for indoor blower fan is testing out of manufacture specification. Replacing this is recommended due to possible cause for damage to indoor blower motor itself. Found that main flame safety is testing very low. If this safety fails, furnace will not stay lit and there will be no heat in home. All furnace recommendations were declined at today’s visit. Found that Ruud air exchanger motor is seized. I unplugged unit to prevent any fire hazard within motor. Discussed with customer repair versus replac
Cody L.
Arrived to find system in standby by. Met realtor at home to evaluate issue. Found that in heating mode, the induced draft motor is making the loud screeching sound as mentioned. Inspector for home had also noted that same issue. Replacement of motor is highly recommended due to furnace failure if motor fails. Attached is a quote for the repair of the induced draft motor. System is from from 2004. Parts may start to fail and consideration of a replacement system is recommended.
Ian H.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.
Ian H.
Humidifier precision tune up and cleaning. Remove current water pad, clean off pad housing and water distributor. Clean out humidifier box. Clear out drain line. Replace with new water pad. Test operation Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.
Anthony G.
Commercial Preventative Maintenance on rooftop units. Replaced filters and belts(if applicable) on 8 units. Perform precision tune up on all heating systems. Pulled and cleaned burners. Test return and supply temps, main flame safety sensors and ignition, gas pressure, combustion test, and amp draw on motors. Checked all electrical inside of the units. Inspected heat exchangers for any visual defects. All RTU’s are heating with no issues at this time. On unit number two I found the heat exchanger had a hole in it. I had to red tag this roof top unit until a repair or another solution can be made.
Brandon D.
Found one of the new water heater fittings to be leaking. Install manager will be in touch to get the squared away and resolved as soon as possible.
Brandon D.
Homeowner explained that the fan wasn’t running when it was supposed to be. Furnace fan was not running when I arrived. Checked all thermostats for fan settings found all thermostat fan settings were set to auto which would cause fan to run only with call for cooling or heating. Also turned off all scheduling on all three thermostats. AC is working properly at this time.
Anthony G.
The heat exchanger is covered under a parts-only warranty. The furnace is 19 years old, replacement should be considered over repair. Installed the new heat exchanger, after the repair was made, and everything is up and working just fine as of now. Customer noted that their carbon monoxide detectors are original to the house which is around 20 years old. I highly recommend replacing all of the carbon monoxide detectors within the house.
Brandon D.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.
Cody L.
Performed AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Recommend installing drain pan treatment, variable speed motor surge protector, and outdoor furnace venting protection. These are all items that will protect the system and add longevity to system. All recommendations declined today, all systems operating normal.
Daniel L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Also performed a humidifier tune up, checked operation of unit, cleaned out the water tray, and lastly changed the water pad. Also checked on filter and doesn’t need to be replaced at this time but next tune up its encouraged. All other recommendations declined at this time.
Brandon D.
Arrived to find parts of the indoor coil freezing up. Found system low on refrigerant. rebalance system with R 22, added leak sealant and Install locking caps on the outdoor unit to prevent refrigerant loss and tampering with the system. Will also meet current Minnesota code. AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Other components are starting to show their age. Attached is a quote to correct those issues.
John R.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Left a year supply of electronic air cleaner filters next to furnace. Installed a new uv light. Existing one was past the 2 year life span. Installed a blower surge protector. This will prevent motor failure if a power surge occurs. Humidifier precision tune up and cleaning. Remove current water pad, clean off pad housing and water distributor. Clean out humidifier box. Clear out drain line. Replace with new water pad. Test operation.
Cody L.
Performed AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Recommend installing outdoor vent protection to prevent animals from getting into furnace, and variable speed motor protector to prevent electrical damage to indoor blower motor.