Buffalo

Your Best Choice for Furnace & Air Conditioning Repair in Buffalo MN

In the Greater Minneapolis North West Metro area, Comfort Matters Heating & Cooling, Inc. is well known for providing exceptional furnace repair, installation, and service. The people we send out to serve you are also top notch, something you'll see in their reviews below. Everyone you deal with at our company has the goal of making sure your experience with us will be so good you'll call us every time you need help. You can feel confident working with Comfort Matters Heating & Cooling, Inc. because we stand behind our work and comply with all local codes. This is why, as you can see by the map and reviews below, we are rated so highly for Furnace & Air Conditioning Repair in Buffalo MN in Maple Grove MN. Call us today at (763) 515-0166!

Local reviews for Furnace & Air Conditioning Repair in Buffalo MN.

Local Reviews
for Buffalo, MN

Comfort Matters Rated 4.9 out of 5 stars based on 121 customer reviews

Map of Buffalo, MN

Wonderful service professional techs




Review of Comfort Matters

Nick and Lucas were a great team of installers.. Very professional and knowledgeable.. Our air and heating units look great… thanks again for the pricing and professionalism.. we will be recommending Comfort Matters to all our friends and family.


Map of Buffalo, MN

Awesome customer service, all down the line!!!




Review of Comfort Matters

From the office personnel, to the service technicians, to the service itself, a stellar experience! We received pictures and bios of the technicians who were scheduled to arrive at our house as introductions, which I love! Jordan was a miracle worker, who responded immediately with a rapid remedy, when our AC went out. Then we were lucky enough to have him return to do our winter furnace assessment. He is personable, knowledgeable, detail oriented, and informative.Tony, who delivered and installed a part that Jordan had identified as potentially problematic for the AC, was also very knowledgeable, and tolerant as well, allowing us to closely observe his work, while patiently explaining every step of the way, as we plagued him with questions. We are delighted with our experiences with Comfort Matters, and that has kept us as satisfied customers for many years!


Map of Buffalo, MN

Great company, great customer service!




Review of Comfort Matters

The HVAC tech that came to our home was friendly, professional, and knowledgeable!


Map of Buffalo, MN

Great professional work!




Review of Comfort Matters

Professional and Experienced!


Map of Buffalo, MN

Super service; delightful interaction!




Review of Comfort Matters

Our AC failed during this crazy record breaking heat wave. Comfort Matters responded immediately to get us up and running, but in the process identified an additional compromised part, for which we had to wait a few days, which got extended by some unavoidable issues/emergencies. Through it all, the main office was continuously in contact with timely updates by phone; we were given “introductions” to each scheduled technician, with photo and bio, by text, for ready identification of authorized arrivals; and were helpfully shown what/why/how the repairs were accomplished. We were beyond pleased by Comfort Matters’ support, service, and all interactions!!! Many thanks to the multiple office personnel, who maintained contact, and to Jordan, who initially got us cooling again, and Anthony who completed the repairs and obligingly put up with our inquisitive hovering, providing in-depth explanations. Kudos to Comfort Matters on assembling a GREAT team!!!


Map of Buffalo, MN

Great Service




Review of Comfort Matters


Map of Buffalo, MN

Awesome service




Review of Comfort Matters

John was polite, informative, knowledgeable and conveyed multiple options to fix and or replace. Not only did he address our concerns but gave us maintenance tips and other advice in order to keep our system functioning properly. Very timely, professional and definitely a rising star tech. Very happy with our service.


Map of Buffalo, MN

Great!!!




Review of Comfort Matters


Map of Buffalo, MN

Great service




Review of Comfort Matters

Very polite, knowledgeable service tech.


Map of Buffalo, MN

Timely Fine Professional Service




Review of Comfort Matters

Fully satisfied


Trusted Service




Review of Comfort Matters

Great service from Comfort Matters! Thank you Jeff!


Great attention to detail




Review of Comfort Matters


Great service




Review of Comfort Matters


Helpful Technician




Review of Comfort Matters

I have no comparison so difficult to say.


Good service




Review of Comfort Matters


Great services




Review of Comfort Matters


Great service!




Review of Comfort Matters

Service above and beyond expectations!


Great service




Review of Comfort Matters

Very polite and answered any questions I had.


Very Responsive..on a Sunday!!




Review of Comfort Matters


Great customer service




Review of Comfort Matters

Best in class company and people


Nick M.

Nick M.

18 SEER Inverter A/C with 98% Modulating Furnace Terms: $5,000 down, with approved financing Centerpoint Rebate filed by Comfort Matters, please allow 6-8 weeks for processing and delivery.

Near Buffalo Run Rd, Buffalo, MN 55313
Anthony G.

Anthony G.

Boiler precision tune up; clean and tune up boiler; check/verify water pressure, inspect and clean burners, test ignition components, test/adjust gas level, test safety circuit, check motors and pumps, checked all electrical components, checked heating temperatures, test combustion, and tested overall boiler operation. Furnace precision tune up; clean and tune up furnace, clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor airflow, checked heating temperatures, and tested overall furnace function. Air Exchanger tune up. Remove filters and core to vacuum. Also clean cabinet interior. Inspect bearings on blower assembly. Install core and filters. Clean off outside hoods. Test operation of air exchanger. Performed a dehumidifier precision tune up, cleaned filters, tested operation of system, cleaned drain line. Performed a humidifier tune up. Cleaned water tray, replaced water pad, cleaned t

Near Pulaski Rd, Buffalo, MN 55313
John R.

John R.

Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Installed a new flame safety and blower starter. Old parts were showing signs of future failure. Blower wheel is in need of a cleaning. No other issues with system. Replacement is encouraged due to age and condition.

Near SE Davison Ave, Buffalo, MN 55313
Jordan L.

Jordan L.

Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Replaced air filter. Blower wheel is dirty which makes motor work harder. Due to age and condition of system, replacement is recommended.

Near 10th St NW, Buffalo, MN 55313
Bradley W.

Bradley W.

Put Condensing unit back into place. Reconnect and recharged AC with Factory Charge plus 10 oz for extra line set from install.

Near 24th St SE, Buffalo, MN 55313
Daniel L.

Daniel L.

Furnace precision tune up; clean and tune up furnace, clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor airflow, checked heating temperatures, and tested overall furnace function. Replaced uv bulbs and tested operation. No other recommendations at this time.

Near Leo Ln, Buffalo, MN 55313
Anthony G.

Anthony G.

The air conditioner drain line was plugged up upon arrival causing water to overflow from the sides. I cleaned the drain line out and tested operation of the ac and drain line, as of now everything is up and operating. The water heater on the other hand I did have to shut off and red tag. The burner cover was completely burned through and after reigniting the water heater flames shot out. The only way to fix this as of now is to replace the entire water heater. I will follow up on price to replace and when we could come out to install a new one tomorrow morning.

Near Halsey Ave SE, Buffalo, MN 55313
Jake W.

Jake W.

Pump down and disconnet condenser.

Near 24th St SE, Buffalo, MN 55313
Anthony G.

Anthony G.

Boiler precision tune up; clean and tune up boiler; check/verify water pressure, inspect and clean burners, test ignition components, test/adjust gas level, test safety circuit, check motors and pumps, checked all electrical components, checked heating temperatures, test combustion, and tested overall boiler operation.

Near Hammond Ave SE, Buffalo, MN 55313
John R.

John R.

AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Start assist and locking caps are recommended. Blower motor changes noise when removing filter. It sounds to be struggling to run, blower is failing. Unable to get ahold of homeowner, left voicemail.

Near Halsey Ave SE, Buffalo, MN 55313
Cody L.

Cody L.

Performed AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. At arrival, found control board showing a B3 error code. This was occurring due to a very dirty blower fan. Informed customer of issues that can occur. Pulled and cleaned blower fan today. Re evaluated system after cleaned fan. Error code went away and all tested were normal. All systems operating normal at this time. recommend variable speed motor protector to prevent electrical damage to indoor blower motor, vent protection screens for furnace venting to prevent animals from getting into furnace, and locking refrigerant caps are recommended to bring unit to code.

Near Jansen Ave SE, Buffalo, MN 55313
Cody L.

Cody L.

Performed Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Discussed replacement thermostats with customer today. Explained air exchanger and how operation of unit works.

Near Buffalo Run Rd, Buffalo, MN 55313
Cody L.

Cody L.

Performed an Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation today. All systems operating normal at this time with no further concerns.

Near Ingalls Dr, Buffalo, MN 55313
Anthony G.

Anthony G.

Replace and test Ac motor starter. After making this repair I tested the operation of the entire system and found that everything is up and working properly as of now.

Near 10th St NW, Buffalo, MN 55313
Bradley W.

Bradley W.

Basement Finish

Near Natalie Dr, Buffalo, MN 55313
Anthony G.

Anthony G.

AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Added drain pan treatment to the indoor coil to prevent any build up and or clogged drain lines.

Near Division St E, Buffalo, MN 55313
Jordan L.

Jordan L.

Arrived to find no power to thermostat, found blown fuse in furnace. Started checking over all wiring for a short. Found a failed Ac motor booster in AC with a melted connection. No shorts found in low voltage side. Replaced fuse in furnace and AC motor booster and tested operation. Found AC motor starter for 2nd stage cooling sparking and failing, collected 200 down for repair and will return with part. Collected payment and authorization over the phone.

Near 10th St NW, Buffalo, MN 55313
Cody L.

Cody L.

Performed AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation, and Air Exchanger cleaning and tune up. Remove filters and core to vacuum. Also clean cabinet interior. Inspect bearings on blower assembly. Install core and filters. Clean off outside hoods. Test operation of air exchanger. Recommend installing drain pan treatment and variable speed motor protector to protect the indoor unit. All recommendations declined today.

Near Halsey Ave SE, Buffalo, MN 55313
Jordan L.

Jordan L.

AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Air exchanger damper was missing, customer already had replacement part. Repaired air exchanger damper and tested operation, sealed flex duct back up. No warranty on repair due to part not coming from us. Air exchanger is part of safety upgrade program, info and phone number to call below.

Near 11th St NW, Buffalo, MN 55313
Daniel L.

Daniel L.

AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. All recommendations declined at this time.

Near Belanger Ave NW, Buffalo, MN 55313
Cody L.

Cody L.

Performed AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Installed new drain pan treatment to prevent mold and bacteria build up in coil. Recommend variable speed motor protector to prevent electrical damage to indoor blower motor. Discussed checking anode rod in water heater. Customer declined due to age of water heater. Would rather look at replacement water heater.

Near Natalie Dr, Buffalo, MN 55313
Anthony G.

Anthony G.

Replace leaking boiler drain valve and leaking air elimination vent. Purge system upon completion and test operation.

Near Lake Blvd S, Buffalo, MN 55313
Cody L.

Cody L.

Conducted AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Recommend installing drain pan treatment strip to prevent mold and bacteria build up in coil, and hard start assist kit to assist in start up of compressor and add longevity to outdoor unit.

Near 12th St NW, Buffalo, MN 55313
Brandon D.

Brandon D.

Return to relocate fan directional wires. Fired Up AC to confirm operation of unit. Performed all work outside did not need to go inside.

Near Barton Ave NW, Buffalo, MN 55313
Jordan L.

Jordan L.

Arrived to find water heater with error code 7 for flammable vapor sensor lockout. Tested sensor to find it at 60ohms which is above the range it should test in. Different chemicals can damage the sensor and cause it to fail. I reset water heater and got it working again but sensor is damaged and will most likely cause issues again, I will follow up tomorrow on price for sensor replacement.

Near Prairie View Ln, Buffalo, MN 55313