Champlin
In the Greater Minneapolis North West Metro area, Comfort Matters Heating & Cooling, Inc. is well known for providing exceptional furnace repair, installation, and service. The people we send out to serve you are also top notch, something you'll see in their reviews below. Everyone you deal with at our company has the goal of making sure your experience with us will be so good you'll call us every time you need help. You can feel confident working with Comfort Matters Heating & Cooling, Inc. because we stand behind our work and comply with all local codes. This is why, as you can see by the map and reviews below, we are rated so highly for Furnace & Air Conditioning Repair in Champlin MN in Maple Grove MN. Call us today at (763) 515-0166!Your Best Choice for Furnace & Air Conditioning Repair in Champlin MN
Local Reviews
for Champlin, MN
Powered by Nearby Nowgreat service again
Evgen - Champlin, MN
Brandon was on time, got the furnace running and did a tune up so we should be set for the cold weather
Great job with AC install!
LisaMK - Champlin, MN
Had a couple guys out to replace AC unit yesterday. They were great, friendly and didn't mind our dogs at all. Got the job done quickly and explained how to work the new thermostats and other general care info.
Good service
Oleson - Champlin, MN
Anthony did a fantastic job, he did not push sales but was still able to show all the options available for general maintanence and upgrades by providing a single sheet with every option from highest to lowest price and work done. Excellent work
A pleasure to do business with.
Meyer - Champlin, MN
Fantastic service
Patchen - Champlin, MN
Fantastic service John was very thorough he check my air-conditioning and furnace making sure everything was correct,Explain things that weren’t I had them fix the things that were not and now my furnace and air conditioner running better
Great customer service!
Susan F. - Champlin, MN
Was happy with John's service. Very professional and did a good job.
Great service!
L Karan - Champlin, MN
Have always had good service from Comfort Matters. Daniel was no exception. We have an OLD system and they have kept it running. I appreciate the reminders when service is due.
Great service
DeNoma - Champlin, MN
Was very polite and professional!!
great service
Amanda - Champlin, MN
the install of the new ac/furnace went very smooth, he showed me how to use my new thermostat. he was very polite and the service was great
Exceptional service and representative
Marthaler - Champlin, MN
Cody was efficient and very professional! Pleasure having him take care of our system!
Great Service
Jake - Champlin, MN
Wonderful and informative
Again, great service!
Dan - Champlin, MN
Great Service
Alicia - Champlin, MN
Jeff was great. He figured out the issue and fixed it right away. He was very polite and professional. We will definitely use Comfort Matters and recommend them going forward. Great service!
Great service
Pat - Champlin, MN
Awesome service!
Catherine - Champlin, MN
I highly recommend Comfort Matters! Good service and great price.
Thank you!
Dan - Champlin, MN
Very satisfied
Cory - Champlin, MN
Great service
Lissa - Champlin, MN
We have used Comfort Matters before and so have other family members. Comfort Matters has skilled, honest and personable staff. I'd recommend them anytime.
Fantastic service
Kelly - Champlin, MN
Fast,experienced, professional, friendly and great at explaining details and options
Great Service and Diagnosis
Mike - Champlin, MN
Jeff did a great job of quickly finding the problem and repairing my furnace. Was honest of what the problem was, saving me hundreds of dollars in repair costs. Took extra time to go over entire furnace and answer all my questions.
Anthony G.
Furnace was not operating upon arrival. After further diagnostics I found that the gas valve was left shut off from the previous visit. I turned the gas on and the furnace started right away. I then proceeded to test the entire system and found that everything is up and operating properly as of now.
Brandon D.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.
Anthony G.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Replaced the gas valve going to the furnace due to the old one not being up to code anymore, as soon as the new valve was in place I tested for leaks with soap bubbles and found that everything is now up and operating properly.
Taylor L.
Signature A/C with new thermostats
Jordan L.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Blower motor booster is out of range and not providing enough power to motor. Replaced motor booster and tested operation. We don’t know if damage to be motor has already occurred from not receiving enough power. Blower wheel is dirty which reduces efficiency. Heat exchanger has burn marks all over it. Airflow is restricted after coil by ductwork. Due to age and condition of system, replacement is recommended.
Ian H.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.
Ian H.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Replaced safety sensor under warranty.
Anthony G.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.
Conner W.
80% furnace with air conditioner Disconnect air conditioner (condenser) afternoon of 9/22 Full installation 9/24 Rebates filed by comfort matters, please allow 8-10 weeks processing and delivery
John R.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Would recommend start assist. Brought A/C up to code of locking refrigerant caps. Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Brought furnace up to current code by added a drip leg. Would recommend vent screens and surge protector.
John R.
System off upon arrival. Turned on unit to test operation. Nothing would run outside. Unit only was getting 74 volts to control board. Diagnosed a failed high voltage fuse. Before replacing fuses, pulled fan, ohmed compressor, ohmed fan motor. Didn’t find any burnt wiring or electrical shorts. Installed two high voltage fuses and didn’t have further issues. Unit works correctly now. Humidifier precision tune up and cleaning. Remove current water pad, clean off pad housing and water distributor. Clean out humidifier box. Clear out drain line. Replace with new water pad. Test operation. Would recommend a blower wheel cleaning and uv light.
John R.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Pulled and cleaned dirty blower wheel. Installed new flame safety, existing one far out of range. System heat correctly was unable to change anode rod due to location of humidifier water line.
Cody L.
Performed AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Recommend installing hard start assist to add longevity to outdoor unit. Drain pan treatment will keep indoor coil drain pan clean and free of mold and bacteria and is recommended also.
Wesley G.
Confirmed failed heat exchanger
Daniel L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. During inspection found that the system would only have a run time of 5 to 10 min and will shut it self down tested refrigerant and temperatures and that was in range. Due to age and condition of system replacement is highly encouraged. Jacob w will meet with you on Thursday the 16th at 6pm to go over replacement options.
Nathan L.
Replace 75 gal water heater, due to code the current venting will need to be replaced and additional pricing will need to be added on.
Daniel L.
Upon arrival found that the take was leaking water. Will need to follow up with homeowner tomorrow with a more firm price on both a tank water heater and tankless water heater.
Cody L.
Performed AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. During evaluation test of outdoor unit, found that motor booster is testing in range, however is rusted and corroded at terminals. This may cause future issues with system. Recommend installing locking refrigerant caps to bring unit to code and vent protection screen to prevent animals from getting into furnace.
Daniel L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Also upon inspection noticed that the furnace blower wheel was extremely dirty and needed to be cleaned. Cleaned the blower wheel and tested operation of unit afterwards. Also upon inspection found that the motor starter on the air conditioner was pitted heavily and had signs of normal wear and tear. All other recommendations declined at this time.
John R.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Motor booster, a/c starter and blower starter are failing. Overall unit in ruff shape. System is over 30 years old, replacement is recommended.
Taylor L.
Replace system
Cody L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Recommend locking refrigerant caps and hard start assist kit for the outdoor unit. Locking caps to bring unit to Minnesota code and start assist kit to prolong life of outdoor compressor. Recommend variable speed motor protector for indoor blower motor to protect from electrical damages.
John R.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Would recommend a new anode rode, start assist, locking caps, pipe insulation and AC starter. System replacement is recommended.
John R.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Confirmed refrigerant levels to find system low on refrigerant. Unit may be cool right now but will get worse over time and officially not work at all. Performed a safety inspection on furnace. Found 2 cracks in heat exchanger. Furnace does not leak co in house. I shut gas valve off on furnace. Unable to shut ball valve off due to power switch In way. System replacement is recommended. Jacob will come out 7/31/21 at 10 am to quote replacement. I will email heat exchanger quote next week.
John R.
Performed a cleaning and tune up
