Dayton
In the Greater Minneapolis North West Metro area, Comfort Matters Heating & Cooling, Inc. is well known for providing exceptional furnace repair, installation, and service. The people we send out to serve you are also top notch, something you'll see in their reviews below. Everyone you deal with at our company has the goal of making sure your experience with us will be so good you'll call us every time you need help. You can feel confident working with Comfort Matters Heating & Cooling, Inc. because we stand behind our work and comply with all local codes. This is why, as you can see by the map and reviews below, we are rated so highly for Furnace & Air Conditioning Repair in Dayton MN in Maple Grove MN. Call us today at (763) 515-0166!Your Best Choice for Furnace & Air Conditioning Repair in Dayton MN
Local Reviews
for Dayton, MN
Powered by Nearby NowGreat service
Michael - Dayton, MN
Daniel took the time to answer all questions I had in a professional and friendly manner. He thoroughly explained things along the way. Thanks!
Great service
Jones - Dayton, MN
On time very efficient and polite
Great service
Rouillard - Dayton, MN
Cody was courteous, thorough and clearly explained the issues and repairs
Great service
Julie - Dayton, MN
Great service
Kevin - Dayton, MN
Love that he called to let me know when he would be here. Also showing up on time/early. Walked me through what he found was wrong. Fixed it right away didn't have to wait for.him to.order a part. Sold me on the preferred customer plan. Really glad I called this company
Nice work
Jack - Dayton, MN
Very helpful, friendly!
Joe - Dayton, MN
Wes performed the necessary repair quickly and offered numerous valuable suggestions. He patiently answered my many questions. First-rate service!
Great job Wesley
Evan - Dayton, MN
Friendly, quick and explained things well.
Great service!
Sheri - Dayton, MN
Wes was great. He explained everything as he went and he had it fixed and running in no time!
Great service!!
Robin - Dayton, MN
Prompt, friendly, thorough service!
muench - Dayton, MN
Nate was prompt, thorough and patient with all of our questions. He got our furnace up and running (on a cold night, no less) even quicker than we had hoped. Outstanding service!
Love this company & its people!
Michelle - Dayton, MN
Great Service!!
Robin - Dayton, MN
excellent service...
Todd - Dayton, MN
I thought he did an excellent job
Judd - Dayton, MN
Great Service!!
Jack - Dayton, MN
On time and thorough
Todd - Dayton, MN
Nate was helpful and courteous. He knew what to do and didn't waste time. Great Service Tech!
Taylor L.
Disposal of old units included. City Permit and Electrical Reconnection not included. Price is only valid for October. Currently I found these units in North Dakota and would have to get shipped in.
Brandon D.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.
Anthony G.
Rtu #3 was off upon arrival. After turning the system back on I found that the ac started right away. I then went through my basic diagnostics and found that everything was up and working as of now.
Daniel L.
Furnace precision tune up; clean and tune up furnace, clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor airflow, checked heating temperatures, and tested overall furnace function. Installed a new programmable smart thermostat and replaced the motor booster on the draft motor. Tested operation afterwards. All other recommendations declined at this time.
Anthony G.
Commercial Preventative Maintenance on rooftop units. Replaced filters and belts(if applicable) on 1 unit. Perform precision tune up on all heating systems. Pulled and cleaned burners. Test return and supply temps, main flame safety sensors and ignition, gas pressure, combustion test, and amp draw on motors. Checked all electrical inside of the units. Inspected heat exchangers for any visual defects. All RTU’s are heating with no issues at this time.
Anthony G.
Commercial Preventative Maintenance on rooftop units. Replaced filters and belts(if applicable) on 3 units.Perform precision tune up on all heating systems. Pulled and cleaned burners. Test return and supply temps, main flame safety sensors and ignition, gas pressure, combustion test, and amp draw on motors. Checked all electrical inside of the units. Inspected heat exchangers for any visual defects. All RTU’s are heating with no issues at this time. On rtu number 1 and 3 I found 5at the heat exchanger has failed on both of these units. I did have to red tag and turn the gas off to both of these systems due to the fact that the are no longer safe to operate. Until either a repair is made or the systems are replaced there will not be heat on either of these units.
Brandon D.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Attached is a quote for recommended repairs on furnace.
Jordan L.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. When I removed blower door and inspected motor I found oil leaking all over from blower motor, it’s a sealed motor and should not be leaking oil. Blower wheel is also dirty with dust and dirt built up.
Cody L.
Arrived to humidifier find humidifier running. System was off and not receiving power. Turned shut off valve on water heater so water would no longer leak. Diagnosed a failed solenoid valve. This was stuck open so even when it was not calling for humidity it would stay open, causing constant flow of water. OST of repairs to old humidifier were very close to replacement humidifier cost. Customer would rather replace entire humidifier, so I collected half down payment for humidifier today, and will collect the rest when humidifier is installed. Customer had mentioned frost on refrigerant lines as well. I recommended a cooling tune up to run through entire system to verify proper operation. I performed an AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation today. I did not find any reason as to why ones would be frosting. Customer was using ver
Brandon D.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation.
Anthony G.
Ac was off upon arrival. After turning both of the thermostats on I then proceeded to test the entire system. After testing he temperatures that the ac was producing I then started to look into the refrigerant system. I ended up finding that the ac is low on refrigerant once again. In order to repair the system we would either have to inject a leak sealant into the ac and then recharge the ac to the proper operating pressures. Or we could perform a leak search on the entire system and pin point where the leak is coming from. However I do not recommend either one of these repairs simply due to the high cost and the age of the rest of the equipment. Home advisor visit scheduled for 9-2-2021 at 8 with Chris M.
Jordan L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Blower motor booster is out of range and not giving enough power to the blower motor which will cause it to overheat and fail. Due to age and condition of system, replacement is recommended.
Brandon D.
Customer explained there was a lot of water coming from the bottom of the furnace. after going through system found AC to be low on refrigerant which can cause the unit to ice up causing the water leak. Added refrigerant, leak sealant and cleaned the outdoor unit to ensure proper levels of refrigerant were added.
Anthony G.
Return visit to remove and install a new blower motor and blower fan housing. After the repair was made I tested the operation of the system and everything is now up and operating correctly.
Bradley W.
Repair. Warranty out blower motor. Pulley separated and motor shaft is shot. Parts ordered 7/27/21. Needs to be replaced 7/28/2021 at 8 AM sharp.
Cody L.
Changed out 2 filters in carrier rooftop unit. While changing out filters, noticed ice build up on coil. This could cause issues with air conditioning such as no cooling scenarios. Recommend having us back out to evaluate system and determine cause of ice.
Cody L.
Replaced filters on rooftop units today. Found that new Daikin rooftop uses different size filters. Unit is brand new and is not in need of filter change at this time, however will be addressed to bring to next visit.
Taylor L.
HUMIDITY ISSUES IN ROOM THAT IS NOT CONNECTED TO ROOFTOP THAT WAS JUST INSTALLED. CHECKED TO MAKE SURE BOTH UNITS WERE WORKING AND THAT ECONOMIZERS WERE ALL THE WAY. CLOSED WHICH THEY WERE. THERMOSTAT WAS SET TO 70 AND WAS SATISFIED WHEN I ARRIVED. FOUND THE CONTINUOUS FAN TO BE ON ON THE ROOFTOP WITH THE HUMIDITY ISSUES. PREVIOUS TECH INSTRUCTED THEM TO KEEP IT ON TO MOVE AIR AROUND WHEN OTHER UNIT WAS DOWN. WITH IS BEING A BRICK BUILDING I BELIEVE THE AC DOESNT RUN A WHOLE LOT SO WITH THE FAN ON ITS DRAWING IN HUMIDITY FROM ABOVE CEILING GRID AND A LITTE FROM OUTSIDE LEAKAGE. TURNED FAN TO AUTO AND LET AC RUN FOR 30 MINUTES. DROPPED HUMIDITY. FROM 75 TO 58 IN THAT TIME. CITY HAD A MEETING IN ROOM WITH THE ISSUES SO I INSTRUCTED THEM TO KEEP THE FAN IN AUTO AND SEE IF THAT TAKES CARE OF IT. ALSO MADE SURE ALL OTHER STATS WERE SET TO AUTO FAN.
Anthony G.
I diagnosed a failed blower motor on a Carrier rooftop unit
Brandon D.
Diagnosed a stuck thermostat relay
Brandon D.
Startup on goodman air conditioner
Brandon D.
Replaced capacitor under warranty
John R.
Verified overall cooling operation
Brandon D.
Replaced control board in Lennox furnace
Jordan L.
No cooling call. Found system low on refrigerant and installed leak seal and recharged.