Hanover
In the Greater Minneapolis North West Metro area, Comfort Matters Heating & Cooling, Inc. is well known for providing exceptional furnace repair, installation, and service. The people we send out to serve you are also top notch, something you'll see in their reviews below. Everyone you deal with at our company has the goal of making sure your experience with us will be so good you'll call us every time you need help. You can feel confident working with Comfort Matters Heating & Cooling, Inc. because we stand behind our work and comply with all local codes. This is why, as you can see by the map and reviews below, we are rated so highly for Furnace & Air Conditioning Repair in Hanover MN in Maple Grove MN. Call us today at (763) 515-0166!Your Best Choice for Furnace & Air Conditioning Repair in Hanover MN
Local Reviews
for Hanover, MN
Powered by Nearby NowGreat service
Zinter - Hanover, MN
Great Service! Cody was very knowledgeable!
Westlund - Hanover, MN
As always, Nick was very helpful and courteous!
Rygg - Hanover, MN
Friendly and Efficient
Franzen - Hanover, MN
John did our annual A/C tune-up. He was very efficient and friendly. Comfort Matters always does a nice job.
Good Service Daniel very professional.
Renner - Hanover, MN
Good
Roisum - Hanover, MN
love comfort matters!
River inn - Hanover, MN
total package!!
Super knowledgeable, great service!
McQueeney - Hanover, MN
Great service
Zachary - Hanover, MN
Great AC tune up. Very thorough job.
Thorough inspection
Couture - Hanover, MN
Cody, Did a great job of sharing what he was finding and what he was going to do next. Great guy and experience.
Prompt, efficient maintenance
Ehlers - Hanover, MN
Great guys!
Rygg - Hanover, MN
Outstanding installation!
Excellent service
Grabowski - Hanover, MN
Cody was efficient, professional and very respectful. Took time to explain things well.
Great service
Jeff - Hanover, MN
Wesley was very nice and efficient. We have always been very happy with the service Comfort Matters provides.
Great Service!
Dennis - Hanover, MN
Friendly and super efficient!
Julie - Hanover, MN
Awesome Experience
Justin - Hanover, MN
Jacob was amazing! From the precall to the end! Very professionally, courteous, helpful, knowledgeable and helpful! Went way above and beyond
Very good, timely service
Sarah - Hanover, MN
Great service!!!
Kevin - Hanover, MN
Mitch dod a wonderful job!
Awesome Service!
Kathleen - Hanover, MN
Mitchell is awesome! He arrived when he said he would, was very efficient in his work, and explained what he did. he's great!
Cody L.
Returned to install warranty gas valve and fresh are pipe drain kit. Checked for any gas leaks from new gas valve installation. No leaks found. Ran Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. After repairs and tune up, furnace is operating normal with no further concerns.
Ian H.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Humidifier precision tune up and cleaning. Remove current water pad, clean off pad housing and water distributor. Clean out humidifier box. Clear out drain line. Replace with new water pad. Test operation Installed ECM surge protector and tested operation. Air Exchanger and tune up. Remove filters and core to vacuum. Also clean cabinet interior. Inspect bearings on blower assembly. Install core and filters. Clean off outside hoods. Test operation of air exchanger. New air exchanger filters purchased, will be shipped to home.
Anthony G.
Return visit to install new damper motor assembly. Factory sent out the wrong part and I was unable to complete repair.
Anthony G.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.
Cody L.
Performed Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Installed vent protection screen on furnace vent to ensure no birds are able to access venting and prevent freezing in the winter time. Recommend switching to different filter due to high duct pressure in system. Poor airflow through furnace resulting from restrictive filter.
Anthony G.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation.
Nick M.
Called homeowner and explained the flashing is normal operation if the furnace
Cody L.
Performed Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Found main flame safety was testing very low and close to failing. Replaced under parts only warranty today. Conducted a full service Humidifier precision tune up and cleaning. Remove current water pad, clean off pad housing and water distributor. Clean out humidifier box. Clear out drain line. Replace with new water pad. Test operation
Jake W.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.
Anthony G.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.
Cody L.
Performed Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Found that main flame safety was testing below manufacture specifications. Recommended replacement to avoid furnace issues with part this winter. Replaced flame safety under parts only warranty today. Recommend humidifier clean and tune up to ensure operation of humidifier is at its peak this winter. Surge protection for indoor blower motor is also recommended. Will follow up with answers to questions Steve had about ductless system in add on for house.
Jordan L.
Performed seasonal precision tune up on cooling units. Chemically cleaned condenser coils, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Removed all economizer filters and washed to clean them economizer filters on make up air unit especially were impossible to get all the way clean and they should most likely be replaced at future tune up. Exhaust from kitchen builds up grease on them and mixes with dirt.
Conner W.
$200 Off September Whole Home Duct Cleaning Promotion
Daniel L.
Furnace precision tune up; clean and tune up furnace, clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor airflow, checked heating temperatures, and tested overall furnace function. All recommendations declined at this time.
Brandon D.
Bird lodged in inducer motor. Replaced inducer motor. Added vent screen to prevent it from happening. System is heating properly at this time.
Brandon D.
Found inducer motor failing not spinning fast enough to close draft safety switch. Attached is a quote for replacement component.
Anthony G.
Boiler precision tune up; clean and tune up boiler; check/verify water pressure, inspect and clean burners, test ignition components, test/adjust gas level, test safety circuit, check motors and pumps, checked all electrical components, checked heating temperatures, test combustion, and tested overall boiler operation.
Anthony G.
Ac was operating upon arrival. After further diagnostics I found that the pressure within the ductwork was substantially higher than what the manufacture rates it for. This means that there is less air moving throughout the ductwork. This can result in colder ac temperatures and therefore can cause a high temperature difference between the return air and the supply air. I highly recommend adding more return vents in the basement and also more supply vents, this will help decrease the pressure and hopefully get the duct pressure to where it is recommended. I also found that the damper assembly on the Broan air exchanger has broken and therefore not allowing the dampers that bring in fresh air to open or close. In order to properly diagnose what is causing the condensation to form I highly recommend having both of these issues addressed and then we can reassess the entire HVAC system.
Brandon D.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Attached is a quote to repair components wearing out to prevent a breakdown
Cody L.
Performed Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation on all three trane furnace units today. Did not find any concerns or mentionable items with today’s visit. All systems operating normal at this time.
Nick M.
Outdoor fan runs, but compressor would not run. I tested the motor starter and found the compressor side to be testing out of range. We will have to order the warranty part and return to complete. I put a turbo 200 in for now to get the homeowner cooling. 50/5 motor starter in there right now. Don Stevens said this model AC uses a 45/5
Brandon D.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Due to age and condition of system, replacement is recommended. Attached are repairs to be considered to prevent a breakdown.
Cody L.
Performed AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. During evaluation of indoor unit, found that heat exchanger and burner assembly is in poor condition. Very rusty inside heat exchanger. Had discussion with customer this could become a threat to cracking. Would highly recommend replacement of furnace to avoid any safety issues with heat exchanger. Outdoor unit motor starter is showing burn marks on contacts. This could create poor electrical connections and larger scale issues in system. Motor booster is testing low on fan side. Replacement of parts are recommended to keep ac unit going, however due to age and condition of system, replacement is recommended.
Daniel L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Due to age and condition of system, replacement is encouraged, all recommendations declined at this time.
Cody L.
Upon arrival, customer had informed me that earlier in the year, there was ice on refrigerant lines. Customer and I discussed possible reasons as to why this could have happened. I performed an AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Found that fan speed in furnace was set lower then the ac requires. Adjusted fan speed per the manual to meet the airflow requirements. Outdoor unit mechanical components are very rusted and corroded. Informed customer this may cause poor electrical connections that may lead to larger scale issues. With the unit being 33 years old, replacement of unit is highly recommended. Would recommend installing variable speed motor protector on indoor blower motor to prevent electrical damage to motor. All systems operating normal at this time.