Long Lake
In the Greater Minneapolis North West Metro area, Comfort Matters Heating & Cooling, Inc. is well known for providing exceptional furnace repair, installation, and service. The people we send out to serve you are also top notch, something you'll see in their reviews below. Everyone you deal with at our company has the goal of making sure your experience with us will be so good you'll call us every time you need help. You can feel confident working with Comfort Matters Heating & Cooling, Inc. because we stand behind our work and comply with all local codes. This is why, as you can see by the map and reviews below, we are rated so highly for Furnace & Air Conditioning Repair in Long Lake MN in Maple Grove MN. Call us today at (763) 515-0166!Your Best Choice for Furnace & Air Conditioning Repair in Long Lake MN
Local Reviews
for Long Lake, MN
Powered by Nearby NowGreat service accompanied by excellent interpersonal skills.
Adams - Long Lake, MN
Did a nice job
Hilbelink - Long Lake, MN
Great service as always!
Jim - Long Lake, MN
Jeff has provided service to us in the past. He is well prepared and efficient. He always makes sure we are totally satisfied with his work. Thanks Jeff
Great fall check-up
Kristina - Long Lake, MN
Jeff was very helpful in answering questions about our aging furnace and air conditioner.
Great service! Professional and prompt.
Claire - Long Lake, MN
Smooth sailing and very professional no pressure sales and pleasant.
Very satisfied
anonymous - Long Lake, MN
Very satisfied
anonymous - Long Lake, MN
This is just my first time using Comfort Matters. I could rate them "excellent", but I would generally reserve that until I have a little more experience with someone.
Great service
Claire - Long Lake, MN
Wes was prompt and professional!!
Great Service!
bill - Long Lake, MN
Tony was very easy to work with and did a great job.
Daniel L.
Furnace precision tune up; clean and tune up furnace, clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor airflow, checked heating temperatures, and tested overall furnace function. Upon inspection found that the filter was dirty and was encouraged to get that changed as soon as possible. Also found a slight dirt build up on the blower wheel. I encouraged the homeowner to get a blower wheel cleaning and then an electronic air filter, so we can maintain cleanliness throughout the home. All recommendations declined at this time.
John R.
Pressure switch stuck open fault code upon arrival. Reset power and tested operation. Same issues after power was reset. Never got 120volts to inducer motor. Board is defective. Installed new board and didn’t have further issues. Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Replacement is recommended due to age and condition. Jacob will come out 10-7-21 at 6pm to quote replacement. WHE approved $500 for repair on furnace
Anthony G.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. X 3 When I proceeded to perform the boiler tuneup, I found that the boiler was not running properly. After inspecting he system further I found that the water pressure inside the boiler is low and the expansion tank is also low on pressure again. On the two older Lennox furnaces I found multiple issues. With the current age and cost of repairs needed I would highly consider replacing both systems to avoid high costing repairs or any more unnecessary repairs.
Daniel L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. All recommendations declined at this time. Will follow up to go over indoor air quality products.
Anthony G.
Customer noted that the ductless unit was not operating upon arrival. After further diagnostics I found that the indoor head had a very dirty blower motor. I cleaned all of the gunk off of the fan blades and then retested the system. Immediately ice started to form on the indoor head yet again. I then connected my gauges to the outdoor unit to inspect the refrigeration levels and found them to be much lower than where the manufacture would recommend, unfortunately I cannot tell how far off we are exactly. In order to properly diagnose the system I would need to return on a day that the manufacture is available. I will follow up on Monday and see what other options we have from here. Installed an I-wave air purifier on the main house furnace. Once the iwave was installed I tested the operation and everything started up just fine.
Cody L.
Performed AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Outdoor unit is not in great condition. Outdoor unit is very unlevel. This can cause compressor oil to lean on way only. Half of compressor will not be properly lubricated and can cause motor to seize. Motor booster is testing out of manufacture recommended range and motor starter is showing signs of burning and pitting. System does not have locking refrigerant caps as part of Minnesota code. These would come with new system. Due to condition and age of system, replacement is highly recommended at this point in time.
John R.
Customer explained they had issues with there heat pump. Heat pump is a geothermal unit with glycol in the system. We do not service these sort of heat pumps. Massman geothermal is who I would recommend.
Anthony G.
Performed an inspection on the furnace and the air conditioner. After inspecting all components and operation, I found that everything is up and working properly, however I did happen to find that the exhaust motor on the furnace did not sound too healthy, this is typically a sign that the bearings inside the motor are starting to fail or seize up. Also happened to find that the air exchanger motor is no longer functioning. All repairs declined at this time.
Cody L.
Conducted AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Noticed water leak sign in furnace. Signs show the exhaust motor hose clamp was misplaced. Re positioned hose clamp to correct spot. Unable to verify water at this time, but informed customer to monitor situation. Recommend installing hard start kit to prolong life of outdoor unit, vent protection screens to prevent animals from getting into furnace, and drain pan treatment strip to prevent mold and bacteria build up in coil. Replaced media filter today with customer provided filter.
Brandon D.
Came out to investigate concerns with upstairs zone open and closed zone three multiple times to make sure damper had full range of motion. investigated all wire connections and tighten them up to ensure the wiring wasn’t causing an intermittent issue. Increased constant fan speed from 200 CFM to 500 CFM to bring more cold air out of the basement into the rest of the house.
Cody L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Pulled and cleaned dirty blower fan today. Explained to customer what issues can arise from this. Also installed variable speed motor protector on indoor blower motor to prevent any electrical damage to motor. Lastly installed new drain pan treatment due to previous one being expired. Recommend locking refrigerant caps to bring unit to code.
Cody L.
Daikon fit service.
Jordan L.
No cooling call. Found Ac wired incorrectly and rewired to get it working.
Daniel L.
Ac tune up. Air conditioning precision tune up on a daikin fit system
Cody L.
Daikin air conditioner precision tune up
Alex M.
AC tune up. AC is in terrific shape for the summer!
Jake W.
New mini split
Cody L.
Daikin furnace precision tune up
Anthony G.
I performed a safety inspection on a Heil furnace
Anthony G.
I replaced a failed zone valve on a NTI boiler
Cody L.
Payne furnace precision tune up
Anthony G.
I diagnosed a plugged up fresh air vent on a Rheem furnace
Cody L.
Rheem furnace tune up maintenance
Alex M.
Fixed and tuned up HVAC system. System is up and running!
Brandon D.
Tune up and cleaning on an Amana furnace
