Rogers
In the Greater Minneapolis North West Metro area, Comfort Matters Heating & Cooling, Inc. is well known for providing exceptional ac repair, installation, and service. The people we send out to serve you are also top notch, something you'll see in their reviews below. Everyone you deal with at our company has the goal of making sure your experience with us will be so good you'll call us every time you need help. You can feel confident working with Comfort Matters Heating & Cooling, Inc. because we stand behind our work and comply with all local codes. This is why, as you can see by the map and reviews below, we are rated so highly for Furnace & Air Conditioning Repair in Rogers MN in Maple Grove MN. Call us today at (763) 515-0166!Your Best Choice for Furnace & Air Conditioning Repair in Rogers MN
Local Reviews
for Rogers, MN
Powered by Nearby NowFantastic service!
Majka - Rogers, MN
Really appreciated Cody’s determination to resolve the issue and conscientious attitude.
Great Experience!
Corbett - Rogers, MN
The entire process of our service call today was great. They came when they said they would, they were quick efficient and knowledgeable.
Super easy and fast
Bley - Rogers, MN
John Is The Best Tech!
Jason - Rogers, MN
Aces! Best service in the industry!
Good Value, Good Staff
Courtney - Rogers, MN
Comfort Matters medium priced but provided excellent value. Staff was knowledgeable, polite, thorough, and professional.
Great Service.
Gayle - Rogers, MN
Great service
Olson - Rogers, MN
Very professional
Great service
Patty - Rogers, MN
Tech was very thorough, noted some issues, took care if them on the spot.
On time, great service, even turning off the lights when finished
Mike - Rogers, MN
Very friendly and knowledgeable!
Dallas - Rogers, MN
Jacob did a great job explaining what he did for our AC tune-up. Jacob is always friendly and even brought up our trash cans before he left.
Great service
Lynette - Rogers, MN
Had a problem with our AC. HE was here very prompt and quickly figured out the problem. Was able to get a part and fix everything fairly quickly
Awesome service
Brent - Rogers, MN
Great, fast, and friendly service!
Great service
Melissa - Rogers, MN
Nate and Chris were always keeping me up to date on what they were doing.They were thorough and Nate was helpful explaining the basics of the new thermostat . Thanks for the new air conditioner !
Explained scope of service well
Scott - Rogers, MN
Great service, Friendly, Professional
Kris - Rogers, MN
Great service from Wesley & gentleman who accompanied him. Both were friendly & very courteous.
Paula - Rogers, MN
Wesley is very good at explaining everything.
Excellent service
Steve - Rogers, MN
I had a minisplit system which I purchased and installed that needed to be presure tested and vacuumed out before it could be used. I contacted Comfort Matters to perform this service, because I had used them in the past to replace my entire house HVAC system. They were very professional and had no issues with the fact that I had installed this unit and hadn’t purchased through them. I am a big DIY individual and found this system easy to install, however I wanted to have it professionally commissioned. The service technician was on time, very knowledgeable and easy to work with. He even provided me with some helpful tips about maintaining this unit which is located in my garage which I use as my workshop. I was happy with the service and will use them again for my HVAC needs and service in the future.
Straight-forward service
Aimee - Rogers, MN
Great service
Karen - Rogers, MN
Fast scheduling to meet our needs
Professional and thorough!
Steve - Rogers, MN
Wes was very professional and thorough. He explained my choices and fixed my problem!
Jordan L.
Performed seasonal precision tune up on cooling units. Chemically cleaned condenser coils, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Cleaned filters and added drain pan treatments to all indoor units. Everything working as it should.
Jordan L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Found 240 wire at motor starter burnt almost all the way through, removed burnt section and cleaned up connection, tightened down so it would not happen again. Blower wheel is starting to get dirty which reduces efficiency.
Cody L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Recommend hard start kit to prolong life of outdoor compressor, locking refrigerant caps to bring unit to code, and drain pan treatment to prevent mold and bacteria build up in coil. Addressed venting issues with furnace as well. Talked to multiple manufacture tech support agents. Found venting is properly measured. Pitch of venting is slightly concerning in one area. Manufacture informed me that issues were found with the inducer motors from the factory. Recommend looking into furnace replacement if issues continue to rise. Attached is quote for air conditioner recommendations today.
Bradley W.
Install ERV and A/C Start up
John R.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Would recommend new insulation, locking caps, blower surge protector and drain pan treatment. System replacement may be in future due to age of current system.
Cody L.
Came to explain air exchanger and do maintenance on unit. Found customer does not have air exchanger. Explained that to customer and control at furnace is secondary fan controller.
Cody L.
Arrived t find water on top of furnace. Leaking from bottom of coil. Did not see ice on coil. Checked refrigerant levels. System may need charge of R22. Found drain spud from coil was not tight. Tightened plug. Did not see any water coming from system at that point. Fully recommend full precision tune up of outdoor unit due to age of system.
Taylor L.
Install Heat Pump and thermostat
Anthony G.
Ac was not operating upon arrival. After further diagnostics I found that the low voltage connected to the ac coming from the furnace was not connected properly, I then rewired the furnace the correct way and found that everything is now up and operating. However I did notice a couple concerns, one problem I found is that the ac motor booster is testing out of the manufacture range, therefore meaning it is closer to failing than it is to being good. Another issue I found is the pressure within the duct work is very high, I recommend replacing the current filter with a much cheaper one and adding return vents in the basement to help the system get as much air as possible. On top of that the current filter is very very dirty and I do recommend replacing as soon as possible.
Anthony G.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation.
Brandon D.
Found compressor side of outdoor motor booster to be failed. Replace component system fired up test and verified operation of AC system is cooling properly at this time. AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation.
Jordan L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. AC motor booster is testing out of range which means it’s not giving correct amount of power to fan motor and compressor. Due to age and condition of system, replacement is recommended.
Jake W.
Replace Condenser
Anthony G.
Performed seasonal precision tune up on cooling units. Chemically cleaned condenser coils, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Added drain pan treatment to the ductless unit head inside.
Cody L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Installed variable speed motor protector to prevent any electrical damages to indoor blower motor. Also installed drain pan treatment strip to prevent mold and bacteria build up in indoor coil.
Anthony G.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation.
Brandon D.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Looked at hoods flagged by inspection and found one to be an intake and have a damper. Took damper off hood. Inspected water damage to furnace and didn’t find a source. Cleaned out drain lines and adjusted line clamps. Annual maintenance should be performed to monitor to see if it returns. Attached is a quote for recommended to prevent a breakdown.
Cody L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. System is currently at 14 years old. Explained to customer this is at the age systems may start to have issues, however none were found at today’s visit. Customer requested I inspect all zone motors and dampers. All seem to be operating normal at this time.
John R.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Installed a new filter and repaired a burnt wire. Also left a spare filter by furnace.
John R.
Performed a cleaning and tune up
Brandon D.
Found ac coil froze. Thawed coil by running the furnace on heat. Outdoor unit was extremely dirty, cleaned ac before investigating refrigerant system. Found System to have developed a refrigerant leak. Refrigerant added to the system (2lbs 8oz, AC from factory had 3 lbs. 12 oz. ) with the goal of limping along to prolong replacement. Added UV leak sealant to give it best chance of patching the leak This is not a permanent fix and timeline for how long it will last is unknown. Replacement is strongly encouraged. Install locking caps onthe outdoor unit to prevent refrigerant loss and tampering with the system. Will also meet current Minnesota code. AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation.
Nick M.
Install Prime Air Conditioner
Daniel L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Due to age of system and being out of state code replacement is highly encouraged to improve on efficiency and overall comfort inside home. All recommendations declined at this time.
Taylor L.
INSTALLED GOODMAN FURNACE AND AC IN ROGERS, MN
Anthony G.
I performed annual maintenance on a Rheem air conditioner
