Saint Michael
In the Greater Minneapolis North West Metro area, Comfort Matters Heating & Cooling, Inc. is well known for providing exceptional ac repair, installation, and service. The people we send out to serve you are also top notch, something you'll see in their reviews below. Everyone you deal with at our company has the goal of making sure your experience with us will be so good you'll call us every time you need help. You can feel confident working with Comfort Matters Heating & Cooling, Inc. because we stand behind our work and comply with all local codes. This is why, as you can see by the map and reviews below, we are rated so highly for Furnace & Air Conditioning Repair in Saint Michael MN in Maple Grove MN. Call us today at (763) 515-0166!Your Best Choice for Furnace & Air Conditioning Repair in Saint Michael MN
Local Reviews
for Saint Michael, MN
Powered by Nearby NowQuick and Amazing Servicd
Samantha - Saint Michael, MN
Our AC stopped working and was not able to be seen until next week. Looked for other options via social media and 85% of people recommended Comfort Matters! They were out here the next morning we called! Jordan did an amazing job, he explained everything and even options for future replacements/preventative maintenance! So glad we chose this company!
Great service
Raltchevsky - Saint Michael, MN
It was a good experience
Wonderful
Coffin - Saint Michael, MN
Anthony was polite, professional, explained what he was going to do and what he did do. This was our first check up with the newly installed system.
Friendly and Helpful
Teal - Saint Michael, MN
Jordan was very friendly and addressed my concerns. He was knowledgeable and explained things well. Always took a picture to show me what he was talking about.
Great service
Jernberg - Saint Michael, MN
Very professional
Great service Sb
Kosloski - Saint Michael, MN
Furnace Repair
Joan - Saint Michael, MN
Great service. Came out the day I called to diagnose failure of our furnace to heat. Had to get special part but came back and stayed into the evening to make repairs. We’re ready for cold weather!
AC Tune Up - feels good to have done
Catherine - Saint Michael, MN
This was a stress-free experience from beginning to end. Making the appointment was easy, the technician was on time, clean and courteous, and I feel good knowing that we are maintaining our system.
Great Service
Rose - Saint Michael, MN
Excellent service. I was very pleased also with suggestions he made. I even signed up for our air exchanger to get on routine maintenance and he installed a screen so rodents can not get into our furnace.
Great service
Stephen - Saint Michael, MN
Jeff was timely and personable. Knowledgable and quick.
Great service
Allen - Saint Michael, MN
Nice service!
Manda - Saint Michael, MN
Professional and considerate service was provided by Jeff!
Great service
Nate - Saint Michael, MN
I liked jeff
Great friendly service
Trish - Saint Michael, MN
Great service, done quickly!
Greg - Saint Michael, MN
Great service. Thanks jeff
Maureen - Saint Michael, MN
Great Service
Mike - Saint Michael, MN
Jeff has been to the house numerous times, once for a pretty major repair and for the furnace and A/C tune-ups and when he does I know that we are getting the best possible service.
Very thorough
Linda - Saint Michael, MN
Jacob was very polite, seemed to know what he was doing, and very thorough.
Excellent service
Brandon - Saint Michael, MN
Wes is always great to work with, very professional.
Good service.
Irv - Saint Michael, MN
A Jeff is a personable, customer minded professional.
Daniel L.
Performed an AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Performed an entire electrical rebuild of unit by installing a new motor booster, motor starter and a start assist kit, also replaced the old pipe insulation, lastly injected ac renew into refrigerant to improve cooling performance, and lower the noise of the system. The unit is still 20 years old and is a mechanical machine. Further repairs down the road may need to happen. No other recommendations at this time.
Cody L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. During evaluation of indoor unit, found failing motor booster. Explained to customer this is different then previous motor booster replaced on outdoor unit. This part failing may cause future issues with indoor blower motor, which is showing signs of premature failure at this point in time. Outdoor unit motor starter is showing signs of pit and burning. This could cause poor electrical connections in outdoor unit and cause electrical shorts. At this point, system is about 20 years old. System replacement recommended. Air Exchanger cleaning and tune up. Remove filters and core to vacuum. Also clean cabinet interior. Inspect bearings on blower assembly. Install core and filters. Clean off outside hoods. Test operation of air exchanger.
Cody L.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.
Daniel L.
Upon arrival unit was turned off, turned on unit and tested power at the furnace and all was well. Went outside to unit and tested low power and was good but tested high power and had no power. Went to breaker box and unit wasn’t tripped. Went back out to unit to find a fuse that was burnt. Tested all electrical components and searched through all wiring to find any shortages, rips in the wiring, and could not find anything. Replaced fuse and unit was up and running. A surge protector on the unit is highly encouraged just to protect the unit and its components. All other recommendations declined at this time.
Jordan L.
Arrived to find outdoor fan and compressor not running. Tested several components and found AC motor booster completely failed. Ac motor starter is burnt and pitted and making a very loud buzzing noise. Replaced Ac motor booster and AC motor starter and tested operation. Due to age and condition of system, replacement is recommended. 15 years is a typical lifespan and system is 18 years old.
Cody L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Recommend replacing motor starter due to current part being in bad condition and making concerning noise. Locking refrigerant caps are recommended to bring unit to code. Looked into air exchanger to ensure proper operation. Tested unit and everything seems to be running normal at this time.
John R.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Blower wheel needs a cleaning from construction dust. Vent screens are recommended. Electronic Air Filter is also recommended to prevent blower wheel from getting dirty again. All additional services declined at this time.
Daniel L.
Performed an AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Took apart the blower section to deep clean the blower wheel as it was covered in construction dust and dust throughout the home. Also installed a new drain pan treatment pad to help against growth and help for better drainage. No other recommendations at this time.
Jordan L.
Ac freezing up and not cooling house properly. I checked several components inside and found air filter very restrictive. Replaced and tested pressure again and foehn it lower but still not getting enough airflow. AC outside was dirty so I performed AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. I found system low on refrigerant which means there is either a small leak somewhere or system was never charged properly. Added leak seal in case there is a leak to slow it down or stop it and also allow us to see where the leak is with Uv. Charged with R410 to proper levels and balanced using superheat. Bigger return drop and filter should be added per manufacturer specifications or system will most likely fail prematurely.
Daniel L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Installed a new drain pan treatment to help treat any growth into system and help for better drainage. All other recommendations declined at this time.
Jordan L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Drain was plugged up, cleared drain line and ran water through to wash it out. Blower motor booster is out of range and not giving enough power to motor. Ac motor starter is burnt and pitted and not a good connection for electricity to run through. Ac motor booster is also out of range and not giving enough power to compressor and fan motor. Replaced restrictive air filter with one that will let more air through.
Brandon D.
Arrived to find drain pan fitting completely clogged. Cleaned out existing fitting as hose was a unique size and reinstalled. If Leak comes back 90° fitting is the first place to check.
Cody L.
Arrived to take pictures of hail damage on outdoor unit. Jon B. Will follow up with further information. Informed customer of large mouse nest and multiple deceased mice in unit as well.
Cody L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. During evaluation of outdoor unit, found motor booster was testing very low, near failed reading. System was installed by us only a year ago. Replaced part under parts and labor warranty today. Tested and verified operation of new part. Found bee nest in vent hood outside near outdoor unit. Sprayed killer into hood. Would recommend using caution when I’m general area. Also included venmar safety upgrade program attachment to invoice.
Brandon D.
Found fan making extra noise. Outdoor unit was very dirty causing motor to work very hard with no airflow through condenser. Also found motor booster to be testing well outside of manufactured rating. This should be replaced to prevent causing more damage to fan motor. Also found blower in the bottom of her furnace to have bearings going out. Causing excessive noise on start up and is starting to fail. AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Replaced blower motor and furnace clean blower wheel with housing out reinstalled tested airflow and amp draw system is up and cooling properly at this time.
Jordan L.
Customer wanted to make sure loud noise when AC starts up was not something harmful to system. Noise on start up sounded normal to me, it does make a louder noise when it starts up vs when it is running. We will make note of it and keep watching it when we come out for the AC tune up next.
Daniel L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. All recommendations declined at this time.
Anthony G.
Ac was not operating upon arrival. After further inspection I found that the motor booster has failed. After replacing this component I then performed a tuneup on the ac. AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation.
Brandon D.
Found system to be cooling to capacity. Did a coolmax test to find system efficiency. System tested out to full efficiency. Increased airflow a setting to 100cfm.
John R.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. A/C starter is burned up. Blower starter is failing. Overall, system is up in age and replacement is highly recommended. Customer will think over repairs and call in if they want any of it addressed.
Jordan L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Lowered cooling fan speed to where it should be for an AC of this size. Found blower wheel dirty which reduces efficiency. Installed bird screens on furnace flue pipes.
Anthony G.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation.
John R.
Found A/C off upon arrival. Turned it on to verify cooling operation. Found motor booster failed causing unit to not run. Installed a new one and tested operation. Everything came on like it should. Refrigerant access caps were not present on A/C. Hook up gauges to A/C to find it low on refrigerant. A/C will cool for now, it may not keep up though. System replacement is recommended. Chris will come out at 8 am 7-30-21 to quote replacement.
Taylor L.
240 volt 20 Amp Electrical Provided to Outdoor Unit by Others
John R.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Installed new drain pan treatment. Installed diamond screen on furnace venting. Lastly installed a blower surge protector. Air Exchanger cleaning and tune up. Remove filters and core to vacuum. Also clean cabinet interior. Inspect bearings on blower assembly. Install core and filters. Clean off outside hoods. Test operation of air exchanger.