Corcoran
In the Greater Minneapolis North West Metro area, Comfort Matters Heating & Cooling, Inc. is well known for providing exceptional furnace repair, installation, and service. The people we send out to serve you are also top notch, something you'll see in their reviews below. Everyone you deal with at our company has the goal of making sure your experience with us will be so good you'll call us every time you need help. You can feel confident working with Comfort Matters Heating & Cooling, Inc. because we stand behind our work and comply with all local codes. This is why, as you can see by the map and reviews below, we are rated so highly for Furnace & Air Conditioning Repair in Corcoran MN in Maple Grove MN. Call us today at (763) 515-0166!Your Best Choice for Furnace & Air Conditioning Repair in Corcoran MN
Local Reviews
for Corcoran, MN
Powered by Nearby NowJordan
Elwell - Corcoran, MN
Great service, and very polite.
Great service by an superb technician
Elwell - Corcoran, MN
Quick and very polite…..
Very helpful and educational
Rutledge - Corcoran, MN
The service technician was professional, understanding; and methodical while troubleshooting. He provided the technical information I needed to a better job of managing the units myself. The end result is better home comfort.
Great job!
Carpenter - Corcoran, MN
Response from Comfort Matters:
Thank you for your 5 star review
Great service
Maack - Corcoran, MN
Great service
Great service
Sandy - Corcoran, MN
Jeff was very informative and helpful in explaining what he found during the inspection of our furnace. He was very efficient.
Owner
Chris - Corcoran, MN
Was very professional and efficient
Very knowledgeable and thorough!
Pat - Corcoran, MN
Very helpful.
Tyler - Corcoran, MN
I learned a lot about the importance of an AC check up.
Great Service
John - Corcoran, MN
Excellent and polite Just plain nice and Pleasant
Service was Excellent
JoAnne - Corcoran, MN
Wesley did a great job. Explanations of everything were very clear. Friendly and helpful service. Thanks.
Great Service
Al - Corcoran, MN
As always, excellent service and knowledgeable employees
great service
John - Corcoran, MN
good job very professional
Love Comfort Matters
Pat - Corcoran, MN
Always very helpful
Lee - Corcoran, MN
Wesley and the rest of the team has alway been very helpful and friendly. They will go over everything you ask about. Great customer service.
Great service
Elizabeth - Corcoran, MN
👍 customer care......
Raymond - Corcoran, MN
Great timely service... Thanks
Great service person !
Floyd - Corcoran, MN
Great service
Al - Corcoran, MN
Excellent service as always
Great service
Froe - Corcoran, MN
John R.
Customer stated how they had no heat. I turned up thermostat, unit fired up but the inducer motor has severe problems. Internal bearings are failing therefore the motor is struggling to run. Motor is extremely loud. Inducer motor is at the end of its life. System replacement is recommended over repair due to age and condition. Will have Jon follow up with pricing options today.
Jordan L.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Recommended surge protector for furnace.
John R.
Furnace off upon arrival. Turned it on to test operation. Furnace would run for a moment and then trip on pressure switch safety. Found extra water was backing up into a switch due to a plugged drain line. Drain line is hard pvc. I plugged the other end of line and injected c02 through it. Debris and water came out of other side of drain line. No blockages in intake or exhaust. No further issues. Heating tune up, flame safety and thermostat and vent screens are recommended.
Jordan L.
Returned to replace leaking collector box and gasket. Removed old parts and removed old gasket material. Fitted new gasket on and installed collector box. Replaced inducer motor and gasket and put furnace back together. Tested operation.
Jordan L.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. I noticed water leaking from collector box that had already been replaced once before. I will order parts and return another day to repair. When I have it opened up I will see if there is a reason why it keeps leaking.
Anthony G.
Thermostat was missing upon arrival. After properly figuring out what zone the thermostat controlled I quoted and the customer declined a new thermostat today. After further assessing the boiler I found that the burners were covered in rust and not properly burning. Boiler precision tune up; clean and tune up boiler; check/verify water pressure, inspect and clean burners, test ignition components, test/adjust gas level, test safety circuit, check motors and pumps, checked all electrical components, checked heating temperatures, test combustion, and tested overall boiler operation.
John R.
Customer stated a consistent water leakage from A/C. I ran A/C, water was leaking from bottom of drain pan, due to sealant never being in place during installation. Drain pan holds water without issues and doesn’t leak. Drain line also clean. Temperature split is poor. Confirmed refrigerant levels to find system low on refrigerant. There is a leak in system. I let homeowner know that the A/C would need to be cleaned first, then recheck charge to see how much further off the refrigerant charge is, then perform a leak search. The estimate will be sent over, that will not repair the issue, it’s the starting point to find the leak. Homeowner will speak to builder and then get back to us if he wants to move forward with estimate.
Brandon D.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation on both heat pumps. Found both systems filters very dirty. Found main house system humidifier to be very dirty.
Jordan L.
Performed seasonal precision tune up on cooling units. Chemically cleaned condenser coils, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Left air filter for main furnace and replaced filter in garage. Ac contractor on main AC is pitted and burnt which creates a bad connection. Run capacitor on garage furnace blower motor is out of range and not providing enough power.
John R.
Customer explained how the master bedroom was more humid than the rest over the course of the last few months. I checked the temperature and humidity. It is 65% humidity in that room. Showed homeowner how to use the dehumidification feature on his new system. This will make the room even more comfortable. Homeowner has never used the feature before. Also having the filters dirty can affect the system performance. A Iwave purifier will help keep room more clean of dust and prevent blower wheel from getting dirty as well as evaporator, filters. Unit is working great and outside unit is clean.
Anthony G.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Replaced the furnace filter with a brand new Trane perfect fit filter.
Cody L.
Performed AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Found that indoor air filter is very dirty. Recommend replacement of filter to prevent any airflow issues within system. Indoor blower fan is dirty as well. Recommend cleaning fan to keep efficiency of system up. Would also recommend variable speed motor protector to prevent electrical damage to indoor blower motor and drain pan treatment strip to prevent mold and bacteria build up in coil. Discussed the electronic air filter with customer. This filter may be the best option due to customer replacing 4inch filter every month. All repairs declined at visit today.
Nick M.
replace furnace and air conditioner
Anthony G.
Ac was not operating upon arrival. After further diagnostics I found that the motor booster has failed therefore preventing the compressor from running. I replaced the motor booster and the system started up right away. After replacing the motor booster I proceeded with my normal diagnostics.
Anthony G.
Furnace was not operating upon arrival. After turning the system on I was unable to get the blower motor up and operating. The ac would kick on but the fan never would. I followed up with the manufacture and tested multiple components and all of my tests confirmed that the control board was shot and no longer able to operate the blower motor correctly. After I replaced the control board on the system I still was unable to get the blower motor up and running. I then tested the motor again and found that it has all the potential to run but was not, this also confirmed that the blower motor has failed. As of now I do highly recommend looking into getting a quote on a new system to receive the service credit and to avoid any further high costing repairs. Home advisor visit scheduled for 8-6-2021 with Chris M at 12:00.
Cody L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Durning evaluation of indoor unit, found blower fan to be dirty and explained to customer importance of having this cleaned. Customer may want to have done in future visits. Also found here was no drain pan treatment strip in coil. Recommended this to keep mold and bacteria build up from happening in coil. These items were declined today. During evaluation of outdoor unit, found motor booster testing out manufacture specifications. Replaced this part to ensure no issues arise from this part in the future. Motor starter is showing signs f burning on contacts. Recommend replacement of this part due to possible poor electrical connections from condition of current part. This repair was declined today.
Anthony G.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation.
Jordan L.
Returned to clean blower wheel and install bird screens. Blower wheel in furnace is dirty reducing air flow/efficiency, pulled and cleaned blower wheel. Reassemble and tested operation. Installed bird screens to keep birds out of furnace. Quoted duct cleaning, quote is attached.
Anthony G.
Ac was not operating upon arrival. After turning the thermostat back on I started with my diagnostics, the motor starter was receiving proper voltage o start the air conditioner, bu nothing was happening. I then tested the high voltage and found that there was no power coming from the breaker box. I tested the fuses on the breaker and found that they have both failed, I recommend replacing both fuses and then having further diagnostics performed. Customer stated he would make his repair him self.
Jordan L.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Motor starter on AC is burnt and pitted, which can cause issues with AC starting. AC renew can be added to refrigerant to help oil get back to compressor and help aging system. Due to age and condition of system, replacement is recommended.
Jordan L.
Ac tune up. Performed maintenance on Goodman air conditioner and replaced failed zone motor.
Anthony G.
I installed a new automatic bypass damper on a Bryant furnace
Jordan L.
Ac tune up. Performed maintenance on Amana heat pump and installed drain pan treatment.
Anthony G.
I diagnosed failed batteries in a Honeywell thermostat
Anthony G.
I diagnosed a Bryant furnace that was not properly set up.
