Medina
In the Greater Minneapolis North West Metro area, Comfort Matters Heating & Cooling, Inc. is well known for providing exceptional furnace repair, installation, and service. The people we send out to serve you are also top notch, something you'll see in their reviews below. Everyone you deal with at our company has the goal of making sure your experience with us will be so good you'll call us every time you need help. You can feel confident working with Comfort Matters Heating & Cooling, Inc. because we stand behind our work and comply with all local codes. This is why, as you can see by the map and reviews below, we are rated so highly for Furnace & Air Conditioning Repair in Medina MN in Maple Grove MN. Call us today at (763) 515-0166!Your Best Choice for Furnace & Air Conditioning Repair in Medina MN
Local Reviews
for Medina, MN
Powered by Nearby NowAwesome Technician!!
Craig - Medina, MN
Did a great job in diagnosing issue and going above and beyond to explain situation and advising the recommended repair.
World class service
Larson - Medina, MN
Service great every time
Replacement parts
Pup - Medina, MN
Working great as far as we know. Thank you for your service
Response from Comfort Matters:
This is just what we like to hear! Thank you for your review!
Fantastic
Dovenberg - Medina, MN
Timely, informative and helpful!
Great staff
Karen - Medina, MN
Wes is the Best
Tom - Medina, MN
We were having issues with our furnace & Wes was on call & came out late. He walked me through what the problems were & what was needed to keep it running.
Awesome as always
Natalie - Medina, MN
Jeff was great! Polite and well spoken. Told me about an issue. No pressure to fix.
Very Professional
Ann - Medina, MN
Great as always
Karen - Medina, MN
Furnace Fix
Ann - Medina, MN
Furnace tune up
Lee - Medina, MN
Great Customer Service
Tom - Medina, MN
Our technician Wes was very thorough & recommended an automatic humidity stat & suggested some settings for the air exchanger to keep the moisture off the windows. Listened well to what the issues were, did some troubleshooting & had an answer for all the questions I had. Thank you for your support to Cancer Awareness.
Air Exchanger
Natalie - Medina, MN
Tony was great. He explained everything about the air exchanger, humidity, heat/cooling, showed me with the intake/outtake were, etc. Very patient. I just wish Cooling Matters didn't put their repair guys on commission.....Very heavy on sales, but I believe that Tony really did believe in the products.
Super helpful technician!
Mary - Medina, MN
Great
Karen - Medina, MN
Fast, efficient, courteous
Scott - Medina, MN
Very pleased.
👍🏻 👍🏻
Tom - Medina, MN
Tony was very professional & explained the responsibility of the damper he was replacing. Appreciated the call on ETA.
furnace maintenance
karen - Medina, MN
They did a good job.
Tony - Medina, MN
Great service, Great professionalism
IanSchot - Medina, MN
Wesley was top notch in his thorough servicing of my system as well as explaining potential issues, options for immediate and long term solutions.
Jordan L.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.
John R.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Would recommend a Iwave, anode rod and humidifier tune up. All declined at this time.
Anthony G.
Commercial Preventative Maintenance on rooftop units. Replaced filters and belts(if applicable) on 2 units. Perform precision tune up on all heating systems. Pulled and cleaned burners. Test return and supply temps, main flame safety sensors and ignition, gas pressure, combustion test, and amp draw on motors. Checked all electrical inside of the units. Inspected heat exchangers for any visual defects. All RTU’s are heating with no issues at this time.
Ian H.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Replaced furnace filter
Daniel L.
Furnace precision tune up; clean and tune up furnace, clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor airflow, checked heating temperatures, and tested overall furnace function. All recommendations declined at this time.
John R.
Customer stated water all over floor recently. Inspector believed the cause was the furnace. Customer has not used the furnace yet this fall. No water leaks from furnace. I opened up A/C evaporator housing to find drain pan full to the rim. Drain pan was not draining. Drain line was blocked. Installed new drain line and fitting. No further issues or leakages. Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Blower wheel in need of a cleaning. Humidifier precision tune up and cleaning. Remove current water pad, clean off pad housing and water distributor. Clean out humidifier box. Clear out drain line. Replace with new water pad. Test operation.
Anthony G.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.
Jordan L.
Performed seasonal precision tune up on cooling units. Chemically cleaned condenser coils, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Found 3 failed zone damper motors for main system. Replaced 3 zone motors for main system and tested operation. Dampers stuck shut were likely causing coil to freeze up. I also found system low on refrigerant which means there is a small slow leak somewhere. I added leak sealant to slow down or stop the leak and added 12oz R410 and balanced using sub cooling method. Changed electronic air filter in main system and left more filters. Replaced both UV bulbs in UV light as they were over 2 years old.
Cody L.
Performed AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Installed variable speed motor protector on indoor blower motor to prevent electrical damage to motor. Also performed Air Exchanger cleaning and tune up. Remove filters and core to vacuum. Also clean cabinet interior. Inspect bearings on blower assembly. Install core and filters. Clean off outside hoods. Test operation of air exchanger.
Bradley W.
Repair. AC portion of system was fixed and cleaned at the shop. Unit was them installed into place.
Cody L.
Arrived and home was 78 degrees. Unit was running but not blowing cool air. Tested and verified all electrical. All electrical was testing good. When I turned the unit off, heard loud hissing noise. Found that the refrigerant line had been punctured. It looks like a TXV metering device line was somehow ripped off of the main line, causing rapid leak in system. When I was previously here in April, all was good and no issue were found. Problem arises between them and now. Removed lower unit to bring back to shop and repair. Left temporary air conditioner with customer to provide cooling.
Anthony G.
Return visit to install a new economizer module. After replacing the old control board I set the new module to the proper settings. After installing the new module I tested operation of the system and found that everything is up and working properly.
Nick M.
Unit running at arrival. I put on Measure Quick and tested operation of the unit. System is operating as it should and is currently cooling the home. Homeowner said it was 78 in the home this morning and it is now 68. She also stated that the outdoor unit was not running this morning. The AC unit does have an off-peak box on it. AC has most likely been off peaked, which wasn’t allowing it to cool.
Anthony G.
Commercial Preventative Maintenance on rooftop units. Replace media filters on all covered pieces of equipment. Perform precision tune up on all cooling systems. Condenser coil cleaned with coil cleaner. Check all electrical inside of the unit for proper operation including motor boosters and starters. Test cfm and airflow for proper air movement. Test supply and return temperatures to ensure proper cooling. Systems are all cooling and operating at this time with no issues. Replaced motor booster on the north rtu. Also found that the economizer on the north unit is still not operating properly.
John R.
A/C off upon arrival. Turned it on to test operation. Diagnosed a failed motor booster. Also found A/C starter failing. A/C is also in need of a tune up. Customer declined repair at this time, homeowner is working with a home warranty company. If that company does not fix A/C, customer will call in and I will get it up and running. Jacob will come out 8-4-21 at 3pm to quote replacement.
Jordan L.
Humidifier giving E1 error code when I arrived which means the internal sensor is failed and not reading temperature or humidity. Replaced humidistat and replaced outdoor temperature sensor. Tested operation. Noticed water valve wasn’t open all the way so I opened it. To operate humidifier control- in winter turn damper to “winter†and press water drop until it changes to auto. Leave set point at 9 unless you see condensation on windows, if you see condensation then turn set point down to 7-8. In summer- turn damper to “summer†and press water drop button to turn controller off.
Alex M.
AC service. AC is in terrific shape for the summer!
Jordan L.
Found zone system switching between heat and cool and not keeping up on the warmer days. Switched to only cool house.
John R.
Diagnosed a A/C low on Freon.
Jordan L.
No cooling call. Added refrigerant and will be installing new system this week.
Kelly F.
Ac. No cooling. Bryant
Daniel L.
Ac tune up. Air conditioning precision tune up on an Daikin ac
Cody L.
Napoleon package unit maintenance
Daniel L.
Air conditioner tune up. Air conditioner precision tune up on a Amana ac
Alex M.
AC tune up. AC is in terrific shape for the summer!
