Skip navigation

Heating and Air Conditioning in Blaine, MN

Your comfort matters to you, so it matters to us! This is our philosophy at Comfort Matters Heating, Cooling, & Plumbing, and it’s why so many homeowners in Blaine, MN rely on us for their heating, AC, and other comfort services. We have a strong set of beliefs that drive us to do the best for every customer. You can count on our integrity, honesty, and dedication to your family’s health and comfort.

  • Family-owned and operated
  • 100% Money-Back Guarantee
  • We do things the RIGHT way, not the easy way

Our comfort advisors and technicians are ready to help you enjoy the home comfort you deserve.

Schedule service today: we’re with you through THE HIGHS & LOWS!

Heating Services in Blaine, MN

The winters in Blaine, MN are often unforgiving … but our team is unrelenting when it comes to helping your family keep warm. We install a range of heating systems—furnaces, boilers, heat pumps—but we’ll never push you on an expensive system that doesn’t meet your needs. We’ll see that your heating remains dependable with maintenance through our Sunshine Club, and our technicians are ready to help with fast repairs when you need them (and they’ll leave your house cleaner than they found it).

Air Conditioning Services in Blaine, MN

If you’re tired of sweating through muggy and hot summers without a decent air conditioner, Comfort Matters Heating, Cooling, & Plumbing can change that. We believe you should have cool comfort in every room, even that bedroom far in the back. Whatever AC service you require for perfect home comfort, you’ll find that we can do the job right: new air conditioning installation, air conditioning replacement, regular AC maintenance, and any size of air conditioning repair. We’ll keep your home fresh and efficient.

Indoor Air Quality Services in Blaine, MN

We believe that clean air means healthy, happy families, and our advisors and technicians know how to make your house an oasis of fresh air. We provide duct services to get your ventilation system in top shape, and we install many of the best, most advanced in air purification and air filtration systems that remove harmful particles from your household air. We even work with powerful humidifiers and dehumidifiers to keep you in perfect comfort around the year.

Commercial HVAC Services in Blaine, MN

We’re a locally-owned company and understand the challenges businesses in Blaine, MN face. We use our training and knowledge to provide great commercial heating, commercial cooling, and commercial indoor air quality to other companies. We abide by the same set of standards and beliefs for commercial services as we do for residential. When you need our help, you’ll always get a real person on the phone, and our technicians will never take shortcuts—we only do things the right way.

Water Heater Services in Blaine, MN

It’s easy to take the hot water supply in your home for granted. But a reliable water heater isn’t something that simply happens: it takes dedicated professionals like the team at Comfort Matters Heating, Cooling, & Plumbing to ensure a water heater is properly installed, repaired, and maintained. No matter what you need for an energy-efficient supply of hot water for your family, you can put your trust in us to get the job done. Let us help improve the life of you and your family.

Local Reviews
for Blaine, MN

Comfort Matters Rated 5.0 out of 5 stars based on 8 customer reviews

Our Reviews by City

Mound, MN (48)
Osseo, MN (246)
Otsego, MN (161)
Rogers, MN (397)


Map of Blaine, MN

Great job, very professional




Review of Comfort Matters


Map of Blaine, MN

Thorough service on checking on our 1 year furnace




Review of Comfort Matters

Friendly and thorough technician


Map of Blaine, MN

Great job and service




Review of Comfort Matters

The replacement went smoothly, everything works great.


Map of Blaine, MN

Taylor Laage is the best




Review of Comfort Matters


Map of Blaine, MN

Great service!




Review of Comfort Matters

Nice kid!


Map of Blaine, MN

This dude is the MAN!




Review of Comfort Matters

Jordan was fast and efficient while giving our a/c and furnace a tune up. He laid everything out (both good and bad) and expertly explained to us what we need to do moving forward. Jordan was very friendly and overly polite! We appreciate his hard work and dedication to our home so we can have a safe and comfortable living space. Thank you Jordan!


Map of Blaine, MN

I was very satisfied with the price.




Review of Comfort Matters

He did a very good job. Very informative, very neat. I will definitely call Comfort Matters for future HVAC needs.


Map of Blaine, MN

Good job!




Review of Comfort Matters


John R.

John R.

System not working upon arrival. Fan motor extremely hot. Spins freely , but was not running. Diagnosed a failed motor booster. Swapped it out, no furthur issues. Checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. System replacement is recommended. Did provided a replacement estimate.

Near 125th Ln NE, Blaine, MN 55434
Anthony G.

Anthony G.

Furnace and ac were not operating upon arrival. I turned the furnace on and then proceeded with my diagnostics, I happened to find that the ignition system for the furnace was broken and had to be replaced, this was not allowing the system to heat the building. I then tried turning the ac on and both the furnace and ac kicked on as they should but no cool air was coming out of the system. I ran diagnostics on the air conditioner and found that there is no refrigerant inside the ac. This means that there is a leak somewhere within the refrigeration system. In order to get the ac up and working we would have to perform a leak search and pin point where the leak is and then take care of it accordingly. However I do not recommend doing any repairs to this system simply due to the age and the high cost of repairs needed to get the system up and working as it should. Home advisor visit scheduled for 5-12-2022 at 11 with Chris A.

Near Davenport St NE, Blaine, MN 55449
Anthony G.

Anthony G.

Furnace was not operating upon arrival. I was unable to see any error codes flashing on the system. I did reset power and tested all components on the furnace and was unable to find anything wrong at this time. I reset the power multiple times and let the unit run for awhile. However I was still unable to pin point any issues at this time. Tim is going to move thermostat to a better location, I recommended putting a cover around the thermostat to prevent anyone from bumping the thermostat and having it fall off. If issue persists I do not recommend turning he power off to the furnace, leave everything where it is and give us a call right away, this way if there is any error codes displayed we can see them or we can see what the hold up is for the unit.

Near University Ave NE, Blaine, MN 55434
Nick M.

Nick M.

Installed 10" return in stairway Static pressure after : with dirty filter Return: .42 Supply: .42 Total: .84

Near London St NE, Blaine, MN 55449
Johnny A.

Johnny A.

Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Overall, system is operating as it should.

Near University Ave NE, Blaine, MN 55434
Cody L.

Cody L.

Peformed Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Found that a drain hose was disconnected from drain trap and there is a good amount of water damage in blower cabinet. Fan is also very dirty, which causes restriction in airflow. Motor capacitor is failing and this could cause damage to motor. Exhaust motor is at its peak power draw. If this goes above the manufacture label, there is great possibility of motor failure. Main flame safety is testing below manufacture specifications. This could cause potential furnace failure. With furnace being 2.0 years old, I recommend replacement. Jacob meets with you tomorrow at 5pm for options.

Near Able St NE, Blaine, MN 55434
John R.

John R.

Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Found humidifier screen blank upon arrival. Found one of the wires that supply’s voltage to display to be loose, causing incorrect voltage. Tighten all connections, humidifier is now fully operational again. Would recommend system replacement, surge protector and upgraded zone damper motor.

Near Waconia Cir NE, Blaine, MN 55449
Jake W.

Jake W.

Performed precision furnace tuneup. Checked igniter, flame sensor, burners, cleaned out water drain trap, took all amp draws, and then a full combustion analysis. Everything seems to be working at this time.

Near 127th Ave NE, Blaine, MN 55434
Daniel L.

Daniel L.

Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Found the furnace filter to be extremely dirty, this will cause issues with the furnace, replaced the filter. Also on the back of the stop light form I wrote down instructions on how to replace air filter. Also found the blower wheel to be dirty, this is caused by negligence on filter changing. To prevent the wheel getting dirty would encourage a cleaning and then keeping up with regular filter changes every three months. All recommendations declined at this time.

Near Alamo Cir NE, Blaine, MN 55449
Ian H.

Ian H.

Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Customer was made aware of how their current filter and town home duct work was restricting their furnace. Provided options to create the best possible solution for this issue.

Near 99th Ct NE, Blaine, MN 55434
Brandon D.

Brandon D.

Responded to a call for a water leak. Flushed out drain system to ensure no blockages or spilling. leak is not coming from heating and cooling unit. Contact a roofing company. Units filters are very dirty as well as condensing coil.

Near University Ave NE, Blaine, MN 55434
Jordan L.

Jordan L.

Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Changed electronic air filter in furnace and left two boxes of filters. Filter should be changed about every 3 months or when dirty.

Near Alamo Cir NE, Blaine, MN 55449
Bradley W.

Bradley W.

Premium furnace and air conditioning system Terms: 50% down, balance due at completion Installation scheduled for September 15, 2021

Near 127th Ave NE, Blaine, MN 55434
John R.

John R.

Two Furnace precision tune up; clean and tune up furnaces. Clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Basement furnace drain line is kinked. Furnace needs a new drain line. If not addressed, furnace water will back up and furnace will not heat. Also would recommend vent screens for venting.

Near Kenyon Ct NE, Blaine, MN 55449
Taylor L.

Taylor L.

AC LOW ON CHARGE AGAIN. PUMPED DOWN SYSTEM AND FILLED WITH NITRO O 400PSI. LEAK CHECKED ALL FITTINGS AND INSIDE COIL. DID NOT FIND ANY LEAKS. TRIED PULLING VACCUM AND WOULDNT PULL DOWN. PURGED WITH NITRO 3 TIMES. WHILE PULLING A VACCUM I WAS PUTTING THE INSULATION BACK ON LINESET. MOVED LINESET AWAY FROM WALL AND NOTICED MICRON GAUGE WOULD PULL DOWN ALOT BETTER WITH THE LINESET PULLED OUT OF WALL A LITTLE BIT. WHEN YOU WOULD LET THE LINESET BACK IN THE MICRONS WOULD START JUMPING BACK UP AGAIN. BELIEVE THERE IS A PINHOLE LEAK ON EXISTING FITTING INSIDE WALL. DISCUSSED WITH HOMEOWNER ON OPTIONS TO TRY EASY SEAL WITH DYE OR CUT THE WALL OPEN. CUSTOMER CHOSE TO TRY EASY SEAL FIRST. CHARGED SYSTEM PER SUB COOLING AND ADDED EASYSEAL. NEED TO RETURN TO CHECK FOR LEAK IN WALL WITH UV LIGHT. ADDED 1LB 12OZ OF 410A.

Near Pheasant Run NE, Blaine, MN 55449
Cody L.

Cody L.

Performed AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation and Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. For indoor unit, recommend installing variable speed motor protector to prevent electrical damages to indoor blower motor, and outdoor venting protection screens to prevent animals from getting into furnace. Recommend for outdoor unit installing drain pan treatment to prevent mold and bacteria build up in coil, and start assist to help outdoor compressor start up. This will add longevity to outdoor unit as a whole. Attached is quote for listed items.

Near Flanders Ct NE, Blaine, MN 55449
John R.

John R.

Customer explained a metal smell from system. Didn’t find anything burnt or things causing odor at today’s visit. The only thing that it could potentially be is the electronic air cleaner. It was plugged in, switch in on position, status light was not lit, and when I pressed the test button, it didn’t do anything. Electronic air cleaner is defective. Removed all of the internal parts and installed a 4in media filter. If system is still causing smells, a Iwave is next step, they are proved to get rid of odors in home. AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Motor booster is out of range and no locking caps for mn code. System is at the end of its life, replacement is recommended. Jacob will come out 9-8-21 at 10am to gather the information he needs to follow up with Paul to go over replacement cost.

Near 127th Ave NE, Blaine, MN 55434
Nick M.

Nick M.

Installation of furnace and AC

Near Able St NE, Blaine, MN 55434
Nick M.

Nick M.

Daikin Premium Furnace and Air Conditioner with advanced air filtration and thermostat controls.

Near London St NE, Blaine, MN 55449
Daniel L.

Daniel L.

AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Air Exchanger and tune up. Remove filters and core to vacuum. Also clean cabinet interior. Inspect bearings on blower assembly. Install core and filters. Clean off outside hoods. Test operation of air exchanger. Also upon inspection noticed that the filters on the air exchanger were hard to get clean so I’m sending over a replacement pack of filters, will need to size the new filters to the old ones. All other recommendations declined at this time.

Near Legacy Creek Pkwy NE, Blaine, MN 55449
Keith R.

Keith R.

Replace furnace and thermostat

Near University Ave NE, Blaine, MN 55434
Jordan L.

Jordan L.

AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. While doing my tests on furnace I conducted a safety inspection to make sure it was safe to operate, I found a crack in heat exchanger which makes it unsafe to run. I turned gas off to furnace. I will follow up on price for a heat exchanger replacement but I also found blower motor leaking oil and motor booster out of range. Due to age and condition of furnace, replacement is recommended.

Near University Ave NE, Blaine, MN 55434
Jordan L.

Jordan L.

Noisy Ac call. Found fan motor vibrating top of older AC and adjusted top to quiet it down.

Near University Ave NE, Blaine, MN 55434
Blaine, MN - Noisy Ac call. Found fan motor vibrating top of older AC and adjusted top to quiet it down.
John R.

John R.

Performed a cleaning and tune up

Near 121st Ave NE, Blaine, MN 55449
Blaine, MN - Performed a cleaning and tune up
Anthony G.

Anthony G.

I diagnosed a Carrier air conditioner low on refrigerant

Near Baltimore St NE, Blaine, MN 55449
Blaine, MN - I diagnosed a Carrier air conditioner low on refrigerant

Do We Serve Your Neighborhood?