Skip navigation

Heating and Air Conditioning in Plymouth, MN

Your comfort matters to you, so it matters to us! This is our philosophy at Comfort Matters Heating and Cooling, and it’s why so many homeowners in Plymouth, MN rely on us for their heating, AC, and other comfort services. We have a strong set of beliefs that drive us to do the best for every customer. You can count on our integrity, honesty, and dedication to your family’s health and comfort.

  • Family-owned and operated
  • 100% Money-Back Guarantee
  • We do things the RIGHT way, not the easy way

Our comfort advisors and technicians are ready to help you enjoy the home comfort you deserve.

Schedule service today: we’re with you through THE HIGHS & LOWS!

Heating Services in Plymouth, MN

The winters in Plymouth, MN are often unforgiving … but our team is unrelenting when it comes to helping your family keep warm. We install a range of heating systems—furnaces, boilers, heat pumps—but we’ll never push you on an expensive system that doesn’t meet your needs. We’ll see that your heating remains dependable with maintenance through our Sunshine Club, and our technicians are ready to help with fast repairs when you need them (and they’ll leave your house cleaner than they found it).

Air Conditioning Services in Plymouth, MN

If you’re tired of sweating through muggy and hot summers without a decent air conditioner, Comfort Matters Heating and Cooling can change that. We believe you should have cool comfort in every room, even that bedroom far in the back. Whatever AC service you require for perfect home comfort, you’ll find that we can do the job right: new air conditioning installation, air conditioning replacement, regular AC maintenance, and any size of air conditioning repair. We’ll keep your home fresh and efficient.

Indoor Air Quality Services in Plymouth, MN

We believe that clean air means healthy, happy families, and our advisors and technicians know how to make your house an oasis of fresh air. We provide duct services to get your ventilation system in top shape, and we install many of the best, most advanced in air purification and air filtration systems that remove harmful particles from your household air. We even work with powerful humidifiers and dehumidifiers to keep you in perfect comfort around the year.

Commercial HVAC Services in Plymouth, MN

We’re a locally-owned company and understand the challenges businesses in Plymouth, MN face. We use our training and knowledge to provide great commercial heating, commercial cooling, and commercial indoor air quality to other companies. We abide by the same set of standards and beliefs for commercial services as we do for residential. When you need our help, you’ll always get a real person on the phone, and our technicians will never take shortcuts—we only do things the right way.

Water Heater Services in Plymouth, MN

It’s easy to take the hot water supply in your home for granted. But a reliable water heater isn’t something that simply happens: it takes dedicated professionals like the team at Comfort Matters Heating and Cooling to ensure a water heater is properly installed, repaired, and maintained. No matter what you need for an energy-efficient supply of hot water for your family, you can put your trust in us to get the job done. Let us help improve the life of you and your family.

Local Reviews
for Plymouth, MN

Comfort Matters Rated 4.9 out of 5 stars based on 188 customer reviews


Map of Plymouth, MN

Emergency call




Review of Comfort Matters

My furnace in my workshop stopped working, putting my store of paint and chemicals at risk with upcoming -18F temps. ComfortMatters responded quickly and fixed my problem


Map of Plymouth, MN

Great service, quick, and professional.




Review of Comfort Matters

On time and done well as always.


Map of Plymouth, MN

Great Service as always!




Review of Comfort Matters


Map of Plymouth, MN

World class service




Review of Comfort Matters

Professional service from start to finish. Prompt responses to every inquiry, fair & competitive pricing, no surprises. A true pleasure to do business with.


Map of Plymouth, MN

Great work and great products




Review of Comfort Matters

The Daikin furnace and air conditioner were installed by Comfort Matters a year ago and work perfectly. They are so quiet I often don't know that they are on. Comfort Matters personnel are very accommodating and responsive to my questions. Highly recommended


Map of Plymouth, MN

Great work




Review of Comfort Matters

Cody did an exceptional job to analyze and resolve our problem.


Map of Plymouth, MN

Excellent service




Review of Comfort Matters


Map of Plymouth, MN

Another good experience




Review of Comfort Matters


Map of Plymouth, MN

Comfort Cares




Review of Comfort Matters

Cody is an outstanding person and even better technician


Map of Plymouth, MN

Great job happy




Review of Comfort Matters


Great Service - Very Thorough




Review of Comfort Matters

Feel very confident with John from Comfort Matters


Excellent service




Review of Comfort Matters

Your company has excellent employees and John was no different. He was well mannered, very thorough and explained everything he did. John spent time talking with us and answered any questions we had. We would highly recommend him.


Great Service...As Always




Review of Comfort Matters

We've been using Comfort Matters for more than ten years and two houses. We recommend them to anyone who asks. You can count on their team to give you honest assessments and never recommend something that isn't needed,


Awesome service




Review of Comfort Matters

Scheduling was quick and easy which was extremely beneficial due to our emergency issue. I received the text with Anthony’s picture and details. He was extremely friendly, knowledgeable and diagnosed the problem quickly. He communicated all details every step of the way and gave us options to consider. He not only solved our issue and provided great advice, but he left us with full confidence that our issue was fully resolved.


Great Service.




Review of Comfort Matters

Questions answered


Outstanding!




Review of Comfort Matters

Anthony did an outstanding job and explained everything I need to know to keep the heat on and sold me on calling you in the future


Great service




Review of Comfort Matters


Great Service by a friendly tech!




Review of Comfort Matters

Very professional, friendly, cleanly on top of the great job!


Great work and quick service.




Review of Comfort Matters


Beyond expectations!!!




Review of Comfort Matters

Jordan was totally professional and very helpful.


Jake W.

Jake W.

Replaced high limit cut out switch and tested full operation. Everything seems to be working at this time.

Near Archer Ln N, Plymouth, MN 55446
Jake W.

Jake W.

Found furnace tripping on high limit. Static pressure was high at .68. Opened up dampers and replaced filter and got down to .4. Lowered gas pressure and tested with furnace still tripping on high limit. Limit switch ordered and will be replaced when it arrives.

Near Archer Ln N, Plymouth, MN 55446
Ian H.

Ian H.

Furnace precision tune up. Pulled and cleaned burners. Inspected heat exchanger for any visual defects, did not find any at this time. Tested ignition assembly components, including flame safety, for proper tolerance ranges. Cleaned out condensate trap. Checked all remaining electrical inside of the unit, measured motor amp draws for correct operating range. Inspected blower wheel for dirt and debris. Checked airflow for proper air movement. Measured combustion and gas pressure for safe levels. Ensured temperatures were within manufacture desired performance. System is heating and operating at this time. It was noticed that the blower motor was pulling amperage above allowable limits. The static pressure reading also indicates a restriction. The furnace return drop (16x25 on a 115,000 BTU furnace) is way to small to allow for proper operation of the blower motor.

Near Olive Ln N, Plymouth, MN 55447
Conner W.

Conner W.

Replace existing equipment. Will be back around spring to do AC install along with thermostat and start up.

Near Sycamore Ln N, Plymouth, MN 55441
John R.

John R.

Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Flame safety is failing. Blower wheel is dirty. Filter is dirty causing high duct pressure. System replacement may be in future due to age and condition. Customer would like hold off on repairs at this time.

Near 34th Ave N, Plymouth, MN 55441
Ian H.

Ian H.

Upon arrival, the furnace was giving a fault code of “33”. The flame rollout switch was bypassed and the furnace started working. The CO reading in the flue pipe was at 3840 PPM. This indicates that there is a major malfunction within the heat exchanger. The furnace was red tagged and the gas was turned off to the equipment. Repair and replacement options were provided to the customer. Jacob is set to visit with the home owner on 01/06/2022 from 5-6 PM.

Near Sycamore Ln N, Plymouth, MN 55441
John R.

John R.

Installed new WiFi thermostat. Left user guide with homeowner. Just need to register thermostat online and set up the app for WiFi controls. Also let customer know which number to call to set up app when they get back home. Collected $1223.50 as half down for water heater. Water heater is getting replaced Monday afternoon.

Near Lanewood Ln N, Plymouth, MN 55447
Ian H.

Ian H.

Furnace precision tune up. Pulled and cleaned burners. Inspected heat exchanger for any visual defects, did not find any at this time. Tested ignition assembly components, including flame safety, for proper tolerance ranges. Cleaned out condensate trap. Checked all remaining electrical inside of the unit, measured motor amp draws for correct operating range. Inspected blower wheel for dirt and debris. Checked airflow for proper air movement. Measured combustion and gas pressure for safe levels. Ensured temperatures were within manufacture desired performance. System is heating and operating with no issues at this time.

Near Forestview Ln N, Plymouth, MN 55442
John R.

John R.

Garage furnace covers off upon arrival. Found fuse blown. Looked over all wire connections at safety switches, control board and thermostat. All are secure. Replaced fuse and furnace fired up. Found gas pressure to burners too high, lowerd pressure to proper operation. Unit is now working properly. System replacement may be in future due to age and condition.

Near Wedgewood Ln N, Plymouth, MN 55441
John R.

John R.

Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Pulled and cleaned blower wheel. Cleaned all blades with brush, warm water and cleaner. Dried the water from wheel and reinstalled wheel into furnace. Would also recommend a electronic air filter to prevent wheel from getting dirty in future. Humidifier precision tune up and cleaning. Remove current water pad, clean off pad housing and water distributor. Clean out humidifier box. Clear out drain line. Replace with new water pad. Test operation.

Near Goldenrod Ln N, Plymouth, MN 55441
John R.

John R.

Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Blower starter, flame safety are electrically failing. Blower wheel is in need of a cleaning. Humidifier has incorrect filter. System replacement is encouraged due to age and condition. Noticed a lot of supply vents on main level closed. They should be open, this could cause problems to furnace and longer heating run time.

Near 60th Ave N, Plymouth, MN 55446
Daniel L.

Daniel L.

Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Found the main flame safety to test out of range, found the blower motor starter to test out of range, found the blower motor to have dirt build up, and lastly found the main thermostat very touchy and should be considered replacement. Replaced the main flame safety and tested operation of the unit. All other recommendations declined at this time. Due to age of system replacement would be encouraged.

Near Pilgrim Ln N, Plymouth, MN 55442
Ian H.

Ian H.

Upon arrival, there was no power at the thermostat or furnace. After troubleshooting, it was determined that the breaker for the furnace in the breaker box was tripped. The breaker was reset and the furnace would run for 2 minutes and then trip the breaker again. It was determined that the blower motor had an internal short and was grounding out the voltage causing the breaker to trip. The blower motor was replaced and the system was heating and operating with no issues after the repair was made.

Near Evergreen Ln N, Plymouth, MN 55441
Bradley W.

Bradley W.

Humidifier Installation with Automatic Control, 5 Year Parts and 2 Year Labor Warranty

Near Quantico Ln N, Plymouth, MN 55446
Anthony G.

Anthony G.

Boiler was not operating upon arrival. After further diagnostics I found that the boiler had no water pressure within. I started by filling the system up and then soon found that the boiler was air locked and needed to be purged out. I then purged the entire system and then proceeded to check all radiators and found that everything is up and working properly as of now.

Near Terraceview Ln N, Plymouth, MN 55447
Cody L.

Cody L.

Upon arrival, customer informed me they had go furnace up and running by pulling and cleaning flame saftey. Explained why that got furnace up and running to customer. Cleaning part is only bandaid fix however and part may fail again. Ran basic diagnostics on furnace. Found blower motor is pre maturely failing. Starter is testing very low. At this rate, blower motor failure may come very soon. Customer is aware of age and condition of system. They would like a full system quote. Jonathan will be meeting with you tomorrow morning at 9:00 am for replacement options.

Near Black Oaks Ln N, Plymouth, MN
Jake W.

Jake W.

Phone water heater flashing a code that indicated high limit. Customers were just on vacation and came back to no water. Reset gas valve and tested and everything seems to be working at this time. If I happen again a gas valve would be the fix.

Near Upland Ln N, Plymouth, MN 55446
Jake W.

Jake W.

Performed precision furnace tuneup. Checked igniter, flame sensor, burners, cleaned out water drain trap, took all amp draw’s, and did a full combustion analysis. Everything seems to be working at this time.

Near Hwy 55, Plymouth, MN 55441
Jake W.

Jake W.

No heat call. Ran test to find that safety flame sensor was not producing amps. Replaced under parts warranty and tested. Signed up on yearly membership plan.

Near Minnesota Ln N, Plymouth, MN 55446
Nick M.

Nick M.

Replace furnace with 96% AFUE 2-Stage Variable-Speed Furnace. Terms: 50% down, balance due at completion of installation OR Approved Financing

Near Cheshire Ln N, Plymouth, MN 55446
Cody L.

Cody L.

Annual Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. On arrival, found water in bottom of furnace. Found it was coming from the condensate trap drain line. Reconnected drain line due to it previously being slightly disconnected. Furnace operating well at this time.

Near Kirkwood Cir, Plymouth, MN 55442
John R.

John R.

Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Also installed Iwave in furnace. All operation of furnace is normal at time. Accidentally overcharged by $50. Will have office send check for $50 to home.

Near Evergreen Ln N, Plymouth, MN 55441
John R.

John R.

Unit in a lockout upon arrival. “7 flash fault code”. This mean open limit. I reset furnace, furnace ran for a few moments then tripped on a pressure switch. Inducer motor is very loud and unable to maintain constant pressure causing pressure switch issues. Also found blower motor not working. Bypassed control board, motor still would not come on. Motor is failed. Burners are also rusted out. Due to age and condition, repairs are not encouraged. Chris will be coming out at noon to quote replacement.

Near Cheshire Ln N, Plymouth, MN 55446
John R.

John R.

Two Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operations. Main furnace duct pressure was very high due to 2 out of 4 main trunk lines closed. Opened both of them. Did hear noise when system shut off. It’s from manuel dampers moving when system shuts off. Tighten all four dampers, a few were loose. 2nd furnace is in need of a new flame safety and blower wheel cleaning. (Wheel is dirty and flame safety is testing out of range). If not addressed, at some point unit may have mechanical problems. 3rd furnace for pool room does not work correctly. Blower motor is locked up. Flame safety is also failed. Furnace didn’t want to stay lit. Furnace is 18 years old and not worth repairing. Will have Jonathan come out next Monday to quote a new unit.

Near Hemlock Ln N, Plymouth, MN 55442
Jake W.

Jake W.

Performed precision furnace tuneup. Checked igniter, flame sensor, burners, clean out water drain trap, took all amp drawls, and then a full combustion analysis. Burners were found unrepairable and inducer motor was making a high-pitched whine. Customer was given options and decided to have a home advisor come out.

Near Cheshire Ln N, Plymouth, MN 55446

Do We Serve Your Neighborhood?