Skip navigation

Maple Plain

Local Reviews
for Maple Plain, MN

Comfort Matters Rated 4.7 out of 5 stars based on 18 customer reviews

Our Reviews by City

Mound, MN (48)
Osseo, MN (246)
Otsego, MN (161)
Rogers, MN (397)


Map of Maple Plain, MN

Good guys good service




Review of Comfort Matters

Easy to work with


Map of Maple Plain, MN

Personal and courteous




Review of Comfort Matters

Service rep Cody did a great job communicating what he felt was the issue. He was knowledgeable and professional from start to finish.


Map of Maple Plain, MN

Great service




Review of Comfort Matters

Great service! John is very polite and through. Always does a great job. Thank you!


Map of Maple Plain, MN

Jake and Keith




Review of Comfort Matters

Jake and Keith did a great job of replacing my A/C and Furnace. Mastered a special thermostat situation as well.


Map of Maple Plain, MN

Great service




Review of Comfort Matters


Map of Maple Plain, MN

Great and quick service.




Review of Comfort Matters


Map of Maple Plain, MN

Great service




Review of Comfort Matters

Dispatcher was no good. Didn't call back, took 2 days and then she tried to bill me. Wes was overly professional and did a great job to make up for the dispatcher.


Map of Maple Plain, MN

Great service




Review of Comfort Matters

Tony's a very nice young man


Map of Maple Plain, MN

Great Service




Review of Comfort Matters

Nate came right out to my house on a Friday when my air conditioner was not working. Costumer service with Comfort Matters is awesome!!!


Map of Maple Plain, MN

Good service, trusted tech




Review of Comfort Matters

Wes seemed very trustworthy, knowledgable, and down to earth. Cost seemed high to have a sensor replaced for $300.


Wes is AWESOME!




Review of Comfort Matters

Thanks Wes for taking the time to not only do the job you came to do but also for chatting and explaining your findings and possible solutions and changes to make my systems even better!


On time,courteous ,trustworthy




Review of Comfort Matters

Wes from your company came out to repair my gas furnance and do annual maintenance. On time ,courteous and I had to leave and completed trusted him in my house alone. Answered all my questions and dîd a great job..


excellent service in every detail




Review of Comfort Matters

yes


So prompt, nice young man




Review of Comfort Matters


Wonderful!




Review of Comfort Matters


Comfort Matters - Always a great experience!




Review of Comfort Matters

I have been a customer of Comfort Matters for at least 2 years now and find their people respectful, qualified people. I would recomend them highly.


Outstanding service




Review of Comfort Matters

I have been working with Comfort Matters now for over one year. I switched to them after trying a couple of name brand franchises. They said a lot but disappointed when needed. I have found that the President, Cory and all the way up and down the staff at Comfort Matters are true professionals. They do what they say they are going to do. Way to go and thank you Comfort Matters Heating & Cooling!


Wes is very thorough and courteous




Review of Comfort Matters


Cody L.

Cody L.

Arrived and system was iced on outdoor unit and partially in the evapaorator coil. Performed AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. System is low on refigerant. Charged unit with R22 to acquire proper charge. Added leak sealant to attempt at stopping leak. Leak sealant is it a gaurentee and ,a unit hold charge. Replacement Is being looked at. Will have home advisor follow up with updated quote.

Near Preserve Blvd, Maple Plain, MN 55359
Johnny A.

Johnny A.

AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Overall system is operating as it should.

Near Bryantwood Dr, Maple Plain, MN 55359
Nathan Y.

Nathan Y.

Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Recommended a diamond screen on furnace exhaust termination. Recommended a surge protector to defend against electrical surges. Also, discussed the benefits of an electronic air cleaner. Customer declined recommendations at this time. Will follow up next week regarding the electronic air cleaner.

Near Broadmoor Dr, Maple Plain, MN 55359
Taylor L.

Taylor L.

ADDED HIGH/LOW GRILLS FOR COMBUSTION AIR INTO MECHANICAL ROOM. ALSO FIXED VENTING TO MEET CLEARANCE.

Near Lindgren Ln, Maple Plain, MN 55359
Daniel L.

Daniel L.

Returned from previous visit to replace the main control board on the unit heater in the garage. Replaced defective control board and tested unit operation afterwards. No further attention is required also due to age and price of future repairs would consider replacement.

Near Copeland Rd, Maple Plain, MN 55359
Jake W.

Jake W.

Low pressure switch was not closing. Found loose wire, reconnected and tested all operations. Everything seems to be working at this time.

Near Timber Island Trail, Maple Plain, MN 55359
Cody L.

Cody L.

Arrived and customer explained that when new thermostat was installed, humidifier quit working. humidifer is over 2.0 years old. Customer could install new humidistat, however that is half the cost of new humidifier. Newer humidifier would be more efficient and is automatic controlled. Customer paid in full today for new humidifier installation.

Near Drake St, Maple Plain, MN 55359
Nick M.

Nick M.

Install ductless unit for renovated space on north end of home. Approved Financing.

Near S Lakeshore Dr, Maple Plain, MN 55359
Nick M.

Nick M.

Replace furnace and air conditioner with 98% AFUE Modulating Variable-Speed Furnace and 18 SEER inverter A/C. Terms: 50% down, balance due at completion of installation OR Approved Financing

Near Stephanie Way, Maple Plain, MN 55359
John R.

John R.

Customer stated how furnace was not working. Had #31 fault code on furnace. Inducer motor was making loud noises. Motor does not make any air pressure. Motor is mechanically failed. Due to age and condition and chances of furthur issues, replacement is encouraged. Provided estimate for homeowner. If replacement is decided today, we could for sure get furnace replaced Monday.

Near Stephanie Way, Maple Plain, MN 55359
Cody L.

Cody L.

Annual Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Informed customer main flame safety is slightly below manufacture specifications. This could lead to possible failure and furnace would not operate. Customer will monitor unit and let us know if any issues occur. Blower wheel cleaning is recommend due to fan starting to coat with dust. No repair made at todays visit. Furnace operating normally at this time.

Near S Lakeshore Dr, Maple Plain, MN 55359
Ian H.

Ian H.

Furnace precision tune up. Pulled and cleaned burners. Inspected heat exchanger for any visual defects, did not find any at this time. Tested ignition assembly components, including flame safety, for proper tolerance ranges. Cleaned out condensate trap. Checked all remaining electrical inside of the unit, measured motor amp draws for correct operating range. Inspected blower wheel for dirt and debris. Checked airflow for proper air movement. Measured combustion and gas pressure for safe levels. Ensured temperatures were within manufacture desired performance. System is heating and operating with no issues at this time. Furnace precision tune up. Pulled and cleaned burners. Inspected heat exchanger for any visual defects, did not find any at this time. Tested ignition assembly components, including flame safety, for proper tolerance ranges. Cleaned out condensate trap. Checked all remaining electrical inside of the unit, measured motor amp draws for correct operating range. Inspected b

Near Christine Dr, Maple Plain, MN 55359
Daniel L.

Daniel L.

Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Air Exchanger cleaning and tune up. Remove filters and core to vacuum. Also clean cabinet interior. Inspect bearings on blower assembly. Install core and filters. Clean off outside hoods. Test operation of air exchanger. On the garage unit heater found the control board to have failed. Check voltage going through all switches and going to control board. Then checked out coming power to gas valve, had incoming gas pressure, spark and draft motor engaging, but failed to ignite. Went over repair costs and Jon B will be following up with you later this afternoon for replacement.

Near Copeland Rd, Maple Plain, MN 55359
Jake W.

Jake W.

Performed precision furnace tuneup on both furnaces. Checked igniter, flame sensors, clean burners, cleaned out both water drain traps, took all amp drawls, and did a full combustion analysis. Did both humidifier tuneups. Replaced both water panels, cleaned out housings, and tested all functions. Cleaned out Air exchanger and tested.

Near Timber Island Trail, Maple Plain, MN 55359
Daniel L.

Daniel L.

Furnace precision tune up; clean and tune up furnace, clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor airflow, checked heating temperatures, and tested overall furnace function. Upon inspection found the blower wheel to be extremely dirty, this could cause major issues for the furnace, such as a potential motor failure, poor airflow, dirty indoor coil and dirty secondary heat exchanger, I would recommend getting a blower wheel cleaning and using a higher performance filter to keep it clean. Lastly noticed rust build up on the left side of the draft motor, homeowner also stated he had a water leakage from the furnace, there were a few possibilities as to why this was rusted. All recommendations have been declined at this time.

Near Pine St, Maple Plain, MN 55359
John R.

John R.

Unit trying to run upon arrival. All safety switches were working properly except the rollout safety switch. It is burnt along with a few wires. I reset switch and furnace fired up. Gas pressure and combustion are within range. Heat exchanger is ok at this time. Repaired the wiring and will come back next week to replace damaged rollout switch. I let homeowner know that there may be others issues going on with furnace. Due to the condition and age, replacement is recommended.

Near Drake Ct, Maple Plain, MN 55359
John R.

John R.

Replaced rollout switch on furnace #2. No burnt wires upon arrival. Replaced failed switch with new. Turned on system to check operation. No additional issues at this time, also no flame rollout. System replacement is recommended.

Near Drake Ct, Maple Plain, MN 55359
Anthony G.

Anthony G.

Furnace was not operating upon arrival. After further diagnostics I found that the flame safety was testing out of manufacture range and therefore causing the furnace to intermittently work. I never once had the furnace shut off or not turn on while I was performing my tests. I spoke with the manufacture and that’s when I found out the flame safety was testing out of range. I would also recommend replacing the pressure safety switch and the thermostat due to the fact that the pressure switch is a known issue with these units and that the thermostats temperature was fluctuating an awful lot. I will have the office schedule a follow up visit so we can make both of these repairs.

Near County Rd 19, Maple Plain, MN 55359
Taylor L.

Taylor L.

Replace furnace and air conditioner with 80% AFUE 2-Stage Variable-Speed Furnace and 16 SEER A/C. Terms: 50% down, balance due at completion of installation OR Approved Financing

Near Lindgren Ln, Maple Plain, MN 55359
Anthony G.

Anthony G.

Furnace was off upon arrival. After further diagnostics I found that the exhaust motor had a large crack running all along the side of the motor housing. I advised customer of the safety concerns and ended up red tagging the furnace. Customer declined all repairs and would like to receive a quote on a new system. All measurements and pictures have been uploaded and will be assessed by our home advisor.

Near Lindgren Ln, Maple Plain, MN 55359
Cody L.

Cody L.

Furnace not operating at arrival. Found error code stating pressure switch was faulty. Cleaned condensate trap and furnace fired up. It cut out again with same errror code. Heckled negative pressure inducer motor was pulling and it was very low. Ran this test with vent connected and disconnected and the inducer motor pulls little pressure either way. Inducer is failed. Customer is going to attempt to replace inducer on their own.

Near Hickory Dr, Maple Plain, MN 55359
Ian H.

Ian H.

Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Humidifier precision tune up and cleaning. Remove current water pad, clean off pad housing and water distributor. Clean out humidifier box. Clear out drain line. Replace with new water pad. Test operation Removed blower wheel from furnace and cleaned off dust and debris, re assembled blower wheel, installed, and tested operation of furnace. Box of 4 (20x25 EAC) filters Replaced UV bulb

Near Aspen Ave, Maple Plain, MN 55359
Jake W.

Jake W.

Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.

Near Bryantwood Dr, Maple Plain, MN 55359
Taylor L.

Taylor L.

Bath Fans, ERV Fix and Extend Venting

Near Preserve Blvd, Maple Plain, MN 55359
Conner W.

Conner W.

Inspect and clean ductwork, show before and after pictures, sanitize ductwork with fogging spray

Near County Rd 19, Maple Plain, MN 55359

Do We Serve Your Neighborhood?